# Print doesnt Stick

**URL:** <https://forum.formlabs.com/t/print-doesnt-stick/4188>\
**Category:** Support & Troubleshooting\
**Created:** [April 8, 2015, 8:07pm UTC](https://forum.formlabs.com/t/print-doesnt-stick/4188 "2015-04-08T20:07:49Z")\
**Posts on this page:** 1\
**Showing post:** 2

<div class="post-metadata">

**Author:** ![Alex\_Vermeer](https://sea1.discourse-cdn.com/flex025/user_avatar/forum.formlabs.com/alex_vermeer/32/2491_2.png) [@Alex\_Vermeer](https://forum.formlabs.com/u/Alex_Vermeer)\
**Post date:** [April 8, 2015, 8:35pm UTC](https://forum.formlabs.com/t/print-doesnt-stick/4188/2 "2015-04-08T20:35:14Z")

</div>

Hi @Simone_Brandi,

I’ve had the same problem and I did the same as you without positive results… Check this topic and it might help you on your way: [Is this forum going the same way as Makerbots?](http://forum.formlabs.com/t/is-this-forum-going-the-same-way-as-makerbots/3989/9)

It’s definitely not the plate.

Like me you lowered the build platform to solve the issue. I ended up needing to raise the build platform for the parts to stick. I know this doesn’t make sense… But you’ll find more info in the link I posted.

---

_[View the full topic](https://forum.formlabs.com/t/print-doesnt-stick/4188)._