# Preform layout changes causing print problems?

**URL:** <https://forum.formlabs.com/t/preform-layout-changes-causing-print-problems/34722>\
**Category:** Support & Troubleshooting\
**Created:** [September 9, 2022, 5:29am UTC](https://forum.formlabs.com/t/preform-layout-changes-causing-print-problems/34722 "2022-09-09T05:29:13Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![pirate](https://avatars.discourse-cdn.com/v4/letter/p/22d042/32.png) [@pirate](https://forum.formlabs.com/u/pirate)\
**Post date:** [September 9, 2022, 5:29am UTC](https://forum.formlabs.com/t/preform-layout-changes-causing-print-problems/34722/1 "2022-09-09T05:29:13Z")

</div>

Dear All: I haven’t printed in a couple years. So, I downloaded the newest preform, and, for my form 2…

For a disk-like structure, it laid out the structure parallel to the build platform. In the old days, and in many, many examples I see here, the layout is usually at ~45 deg. to the platform.

The resulting print was terrible, with the disk having a non-uniform thickness with a linear cross-section; think of a disk with left hand edge thick and right hand edge thin.

—\> Did preform change, and the orientaiton is normal? Or…?

—\> Any ideas on my print issues?

Thanks much,

-TPC

---

<div class="post-metadata">

**Author:** ![Corey\_M](https://sea1.discourse-cdn.com/flex025/user_avatar/forum.formlabs.com/corey_m/32/18987_2.png) [@Corey\_M](https://forum.formlabs.com/u/Corey_M)\
**Post date:** [September 9, 2022, 2:34pm UTC](https://forum.formlabs.com/t/preform-layout-changes-causing-print-problems/34722/2 "2022-09-09T14:34:20Z")

</div>

Hi @pirate,

With each new iteration of PreForm there are a good number of changes and sometimes things aren’t always ideal; I would try to manually orient this file (either 45º as mentioned or even a bit shallower; you can use the slicing tool to see how severe each layer step will be) and then either check for an update or even regress to a previous version of Preform to see if that auto-orient option is better.

If the issues persist, you can feel free to reach out to our [Support Team directly by opening a ticket](https://support.formlabs.com/s/contact-support?language=en_US) and sharing photos and .form files so that we can assist further.

---

<div class="post-metadata">

**Author:** ![system](https://us1.discourse-cdn.com/flex025/uploads/formlabs/original/3X/5/b/5bc2bdf993ff27c2e0eecab5010b25626fbb327a.png) [@system](https://forum.formlabs.com/u/system)\
**Post date:** [March 11, 2023, 2:34am UTC](https://forum.formlabs.com/t/preform-layout-changes-causing-print-problems/34722/3 "2023-03-11T02:34:52Z")

</div>

Closed on March 11, 2023, 2:34am UTC

This topic was automatically closed 182 days after the last reply. New replies are no longer allowed.
