# Preform.exe has stopped working?

**URL:** <https://forum.formlabs.com/t/preform-exe-has-stopped-working/6349>\
**Category:** Support & Troubleshooting\
**Created:** [September 17, 2015, 7:59am UTC](https://forum.formlabs.com/t/preform-exe-has-stopped-working/6349 "2015-09-17T07:59:01Z")\
**Posts on this page:** 6\
**Page:** 1

<div class="post-metadata">

**Author:** ![FormBeast](https://avatars.discourse-cdn.com/v4/letter/f/e99b99/32.png) [@FormBeast](https://forum.formlabs.com/u/FormBeast)\
**Post date:** [September 17, 2015, 7:59am UTC](https://forum.formlabs.com/t/preform-exe-has-stopped-working/6349/1 "2015-09-17T07:59:01Z")

</div>

I suddenly can’t run preform anymore ☹ I get an error message every time I try to load it. Running on high spec system with Windows 10. Was working fine last week so very confused. Anyone else had this?

![](https://us1.discourse-cdn.com/flex025/uploads/formlabs/original/2X/7/743e7be5d3e3651e42966d7d9d43765373658c65.JPG)

---

<div class="post-metadata">

**Author:** ![Jory](https://sea1.discourse-cdn.com/flex025/user_avatar/forum.formlabs.com/jory/32/229_2.png) [@Jory](https://forum.formlabs.com/u/Jory)\
**Post date:** [September 17, 2015, 8:16pm UTC](https://forum.formlabs.com/t/preform-exe-has-stopped-working/6349/2 "2015-09-17T20:16:38Z")

</div>

Edward - I would try a complete re-install of Preform. If that doesn’t work, [send us a ticket so we can take a look with our software team.](http://tickets.formlabs.com/anonymous_requests/new?ticket%5Bfields%5B24092763%5D%5D=us)

Jory

---

<div class="post-metadata">

**Author:** ![FormBeast](https://avatars.discourse-cdn.com/v4/letter/f/e99b99/32.png) [@FormBeast](https://forum.formlabs.com/u/FormBeast)\
**Post date:** [September 18, 2015, 7:03am UTC](https://forum.formlabs.com/t/preform-exe-has-stopped-working/6349/3 "2015-09-18T07:03:46Z")

</div>

Thanks Jory. I did try re-installing and even tried an older version but no luck. Could it be conflicting with something? I have no idea of what though as I haven’t recently installed anything.

---

<div class="post-metadata">

**Author:** ![FormBeast](https://avatars.discourse-cdn.com/v4/letter/f/e99b99/32.png) [@FormBeast](https://forum.formlabs.com/u/FormBeast)\
**Post date:** [September 18, 2015, 7:09am UTC](https://forum.formlabs.com/t/preform-exe-has-stopped-working/6349/4 "2015-09-18T07:09:44Z")

</div>

Here is what the event viewer is saying about the crash:

![](https://us1.discourse-cdn.com/flex025/uploads/formlabs/original/2X/e/e726b8077fcc9c628fa51d9471ca4f72102a7ed8.JPG)

---

<div class="post-metadata">

**Author:** ![Jory](https://sea1.discourse-cdn.com/flex025/user_avatar/forum.formlabs.com/jory/32/229_2.png) [@Jory](https://forum.formlabs.com/u/Jory)\
**Post date:** [September 20, 2015, 2:53pm UTC](https://forum.formlabs.com/t/preform-exe-has-stopped-working/6349/6 "2015-09-20T14:53:42Z")

</div>

Resolved by updating graphics drivers.

Jory

---

<div class="post-metadata">

**Author:** ![system](https://us1.discourse-cdn.com/flex025/uploads/formlabs/original/3X/5/b/5bc2bdf993ff27c2e0eecab5010b25626fbb327a.png) [@system](https://forum.formlabs.com/u/system)\
**Post date:** [October 4, 2015, 2:54pm UTC](https://forum.formlabs.com/t/preform-exe-has-stopped-working/6349/7 "2015-10-04T14:54:14Z")

</div>

Closed on October 4, 2015, 2:54pm UTC

This topic was automatically closed 14 days after the last reply. New replies are no longer allowed.
