# Preform crashes while uploading to my Form 2 with the 2.17.1 update

**URL:** <https://forum.formlabs.com/t/preform-crashes-while-uploading-to-my-form-2-with-the-2-17-1-update/20449>\
**Category:** Form 2\
**Created:** [September 17, 2018, 2:03pm UTC](https://forum.formlabs.com/t/preform-crashes-while-uploading-to-my-form-2-with-the-2-17-1-update/20449 "2018-09-17T14:03:19Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Void\_Masamune](https://avatars.discourse-cdn.com/v4/letter/v/3d9bf3/32.png) [@Void\_Masamune](https://forum.formlabs.com/u/Void_Masamune)\
**Post date:** [September 17, 2018, 2:03pm UTC](https://forum.formlabs.com/t/preform-crashes-while-uploading-to-my-form-2-with-the-2-17-1-update/20449/1 "2018-09-17T14:03:19Z")

</div>

I just updated to 2.17.1 and updated my firmware to 1.18.12 and now during uploading Preform crashes about 2/3rds into Generating Print Files…

Thanks for your help and have a good day.

Update:

I deleted some previous prints from my printer history list, opened a new Preform session, redid the Supports and then it uploaded just fine. Perhaps the supports from the previous version weren’t xD “supported” after the update is my guesstimation. I’ll update if I run into more trouble.

---

<div class="post-metadata">

**Author:** ![system](https://us1.discourse-cdn.com/flex025/uploads/formlabs/original/3X/5/b/5bc2bdf993ff27c2e0eecab5010b25626fbb327a.png) [@system](https://forum.formlabs.com/u/system)\
**Post date:** [September 24, 2018, 2:03pm UTC](https://forum.formlabs.com/t/preform-crashes-while-uploading-to-my-form-2-with-the-2-17-1-update/20449/2 "2018-09-24T14:03:26Z")

</div>

This topic was automatically closed 7 days after the last reply. New replies are no longer allowed.