# Pre cure sleep function

**URL:** <https://forum.formlabs.com/t/pre-cure-sleep-function/18410>\
**Category:** Feature Requests & Ideas\
**Created:** [April 19, 2018, 2:25pm UTC](https://forum.formlabs.com/t/pre-cure-sleep-function/18410 "2018-04-19T14:25:02Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![CMSDesign](https://avatars.discourse-cdn.com/v4/letter/c/c4cdca/32.png) [@CMSDesign](https://forum.formlabs.com/u/CMSDesign)\
**Post date:** [April 19, 2018, 2:25pm UTC](https://forum.formlabs.com/t/pre-cure-sleep-function/18410/1 "2018-04-19T14:25:02Z")

</div>

You can put to sleep wash and the printer, but not the cure unit?

Chris

---

<div class="post-metadata">

**Author:** ![MattKeeter](https://sea1.discourse-cdn.com/flex025/user_avatar/forum.formlabs.com/mattkeeter/32/12053_2.png) [@MattKeeter](https://forum.formlabs.com/u/MattKeeter)\
**Post date:** [April 19, 2018, 5:39pm UTC](https://forum.formlabs.com/t/pre-cure-sleep-function/18410/2 "2018-04-19T17:39:09Z")

</div>

We’ve rolled out a firmware updater that fixes this – see discussion in [this thread](http://forum.formlabs.com/t/cure-station-lcd-sleep-mode/16802/20).

---

<div class="post-metadata">

**Author:** ![CMSDesign](https://avatars.discourse-cdn.com/v4/letter/c/c4cdca/32.png) [@CMSDesign](https://forum.formlabs.com/u/CMSDesign)\
**Post date:** [April 19, 2018, 6:55pm UTC](https://forum.formlabs.com/t/pre-cure-sleep-function/18410/3 "2018-04-19T18:55:24Z")

</div>

Hi Matt, thanks for the speedy update.

As new user I am most impressed with your support and response times, if you can maintain this standard as you grow you will be running the world very soon!

Please pass on my thanks to the team.

Best Chris