# PoisedWhale reporting for duty **URL:** \ **Category:** Form 3/3+\ **Created:** [October 4, 2019, 8:24pm UTC](https://forum.formlabs.com/t/poisedwhale-reporting-for-duty/24886 "2019-10-04T20:24:08Z")\ **Posts on this page:** 1\ **Showing post:** 25
**Author:** ![rkagerer](https://avatars.discourse-cdn.com/v4/letter/r/439d5e/32.png) [@rkagerer](https://forum.formlabs.com/u/rkagerer)\ **Post date:** [October 29, 2019, 12:45am UTC](https://forum.formlabs.com/t/poisedwhale-reporting-for-duty/24886/25 "2019-10-29T00:45:43Z")
> [@Ante\_Vukorepa](#): > > All positive features i’ve checked measure as they should / dead on. Interesting! That’s quite a different result than the caliper photos here seen here (which IIRC is off by 3-10%): > [@Print Quality Issue with Black Resin](http://forum.formlabs.com/t/print-quality-issue-with-black-resin/24892/17): > > jbrownson, Thanks for printing the same model on yours. Now, I see I am not alone on this ship… sunglasses Yes, your print seems also over-cured, but a little better than mine. I have tested other standard resin types. Unfortunately, all of them are in the almost same quality. The worst one is with the white resin. Shown below is printed with 0.05mm layer thickness, white resin on Form 2. Shown below is with the same layer thickness, white resin on Form 3. Wi… In case it’s at all helpful to you, here’s the very first part I designed and printed on my Form 1, [ShaftTest.zip](https://tinyurl.com/ShaftTest): ![ShaftTest](https://us1.discourse-cdn.com/flex025/uploads/formlabs/original/2X/f/f18674997b46cc057d7cf6c17a7e64955af6fbc1.jpg) Thanks for doing all this testing - keep up the good work! --- _[View the full topic](https://forum.formlabs.com/t/poisedwhale-reporting-for-duty/24886)._