# Painting or Dyeing Flexible Resin

**URL:** <https://forum.formlabs.com/t/painting-or-dyeing-flexible-resin/13878>\
**Category:** General Discussion\
**Created:** [June 25, 2017, 2:49am UTC](https://forum.formlabs.com/t/painting-or-dyeing-flexible-resin/13878 "2017-06-25T02:49:12Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![Dudemeister](https://sea1.discourse-cdn.com/flex025/user_avatar/forum.formlabs.com/dudemeister/32/13812_2.png) [@Dudemeister](https://forum.formlabs.com/u/Dudemeister)\
**Post date:** [June 25, 2017, 2:49am UTC](https://forum.formlabs.com/t/painting-or-dyeing-flexible-resin/13878/1 "2017-06-25T02:49:13Z")

</div>

I have a just finished printing some bellows using Flexible v1.

Is there a way to die this or paint it so that it doesn’t crack when flexing it?

---

<div class="post-metadata">

**Author:** ![Randy\_Cohen](https://sea1.discourse-cdn.com/flex025/user_avatar/forum.formlabs.com/randy_cohen/32/1500_2.png) [@Randy\_Cohen](https://forum.formlabs.com/u/Randy_Cohen)\
**Post date:** [June 25, 2017, 3:52am UTC](https://forum.formlabs.com/t/painting-or-dyeing-flexible-resin/13878/2 "2017-06-25T03:52:38Z")

</div>

I’d be surprised if the surface was porous enough to soak up some dye. And if it isn’t porous enough you’d need a solvent based dye and FL help to figure it out. But there’s no harm in trying some Rit Dye to see what happens. If that doesn’t work, you might take a look at painting it with Plasti Dip spray paint. It might go on a bit thicker than you want, but it’s basically latex rubber in a spray can, it remains very flexible after it’s dry.

---

<div class="post-metadata">

**Author:** ![VeryWetPaint](https://sea1.discourse-cdn.com/flex025/user_avatar/forum.formlabs.com/verywetpaint/32/5661_2.png) [@VeryWetPaint](https://forum.formlabs.com/u/VeryWetPaint)\
**Post date:** [June 26, 2017, 10:39pm UTC](https://forum.formlabs.com/t/painting-or-dyeing-flexible-resin/13878/3 "2017-06-26T22:39:29Z")

</div>

Try alcohol based inks from a craft store.

Any color will probably work with Flexible v1. Metallic colors might work with Flexible v2 – I’m going to give that a try!

---

<div class="post-metadata">

**Author:** ![Vespie](https://avatars.discourse-cdn.com/v4/letter/v/9e8a1a/32.png) [@Vespie](https://forum.formlabs.com/u/Vespie)\
**Post date:** [September 12, 2017, 2:33pm UTC](https://forum.formlabs.com/t/painting-or-dyeing-flexible-resin/13878/4 "2017-09-12T14:33:29Z")

</div>

Did you try the alcohol based inks with the Flexible? I would be very interested in knowing the out come of using the inks. I just started using the Flexible V2.
