# Pa12 Alumide with fuse1+?

**URL:** https://forum.formlabs.com/t/pa12-alumide-with-fuse1/45795
**Category:** Fuse 1/1+
**Created:** [December 1, 2025, 1:11pm UTC](https://forum.formlabs.com/t/pa12-alumide-with-fuse1/45795 "2025-12-01T13:11:57Z")
**Posts on this page:** 2
**Page:** 1

<div class="post-metadata">

### Author: ![Paolo](https://avatars.discourse-cdn.com/v4/letter/p/6f9a4e/32.png) [@Paolo](https://forum.formlabs.com/u/Paolo)
#### Post date: [December 1, 2025, 1:11pm UTC](https://forum.formlabs.com/t/pa12-alumide-with-fuse1/45795/1 "2025-12-01T13:11:57Z")

</div>

I was wondering if anyone with open material mode has ever printed aluminum-filled PA12 (Alumide) with the Fuse1 and whether or not it’s possible. Does anyone know anything?

---

<div class="post-metadata">

### Author: ![system](https://us1.discourse-cdn.com/flex025/uploads/formlabs/original/3X/5/b/5bc2bdf993ff27c2e0eecab5010b25626fbb327a.png) [@system](https://forum.formlabs.com/u/system)
#### Post date: [May 30, 2026, 1:12pm UTC](https://forum.formlabs.com/t/pa12-alumide-with-fuse1/45795/2 "2026-05-30T13:12:08Z")

</div>

This topic was automatically closed 180 days after the last reply. New replies are no longer allowed.