# Override leveling sensor

**URL:** <https://forum.formlabs.com/t/override-leveling-sensor/34463>\
**Category:** Form 3/3+\
**Created:** [July 27, 2022, 5:57pm UTC](https://forum.formlabs.com/t/override-leveling-sensor/34463 "2022-07-27T17:57:07Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Fuergrissa](https://avatars.discourse-cdn.com/v4/letter/f/e5b9ba/32.png) [@Fuergrissa](https://forum.formlabs.com/u/Fuergrissa)\
**Post date:** [July 27, 2022, 5:57pm UTC](https://forum.formlabs.com/t/override-leveling-sensor/34463/1 "2022-07-27T17:57:07Z")

</div>

Is there a way to override the leveling sensor?

It says the printer is out of level, but the sensor does not respond when adjusting the feet. I have checked that the machine is level on both axis with a bubble level but cannot print while the machine thinks it is out of level.

is there a workaround?

---

<div class="post-metadata">

**Author:** ![Corey\_M](https://sea1.discourse-cdn.com/flex025/user_avatar/forum.formlabs.com/corey_m/32/18987_2.png) [@Corey\_M](https://forum.formlabs.com/u/Corey_M)\
**Post date:** [July 27, 2022, 6:12pm UTC](https://forum.formlabs.com/t/override-leveling-sensor/34463/2 "2022-07-27T18:12:06Z")

</div>

Hey @Fuergrissa,

Sorry that you’re having problems with your printer’s leveling system; it sounds like the gyroscope might be out of sync, but the good news is that we should be able to apply a remote fix after you have manually leveled your printer with a bubble level. Please [open a ticket with our Support Team](https://support.formlabs.com/s/contact-support?language=en_US) and let them know what has been happening along with your printer’s serial name and we can get you through the couple of troubleshooting steps needed to prepare for the remote fix.