# Over curing a part

**URL:** <https://forum.formlabs.com/t/over-curing-a-part/4081>\
**Category:** Support & Troubleshooting\
**Created:** [March 30, 2015, 3:35pm UTC](https://forum.formlabs.com/t/over-curing-a-part/4081 "2015-03-30T15:35:51Z")\
**Posts on this page:** 1\
**Showing post:** 10

<div class="post-metadata">

**Author:** ![Greg\_Bethel](https://avatars.discourse-cdn.com/v4/letter/g/77aa72/32.png) [@Greg\_Bethel](https://forum.formlabs.com/u/Greg_Bethel)\
**Post date:** [April 3, 2015, 5:21pm UTC](https://forum.formlabs.com/t/over-curing-a-part/4081/10 "2015-04-03T17:21:25Z")

</div>

You can use a UV-resistant clearcoat on the parts - see [this post](http://forum.formlabs.com/t/long-term-effects-on-prints/1275/3?u=greg_bethel).

---

_[View the full topic](https://forum.formlabs.com/t/over-curing-a-part/4081)._