# Odd printing issue (Peeling?) on diagonal surfaces

**URL:** <https://forum.formlabs.com/t/odd-printing-issue-peeling-on-diagonal-surfaces/962>\
**Category:** Support & Troubleshooting\
**Created:** [March 8, 2014, 6:40pm UTC](https://forum.formlabs.com/t/odd-printing-issue-peeling-on-diagonal-surfaces/962 "2014-03-08T18:40:24Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![HajeJanKamps](https://avatars.discourse-cdn.com/v4/letter/h/b3f665/32.png) [@HajeJanKamps](https://forum.formlabs.com/u/HajeJanKamps)\
**Post date:** [March 8, 2014, 6:40pm UTC](https://forum.formlabs.com/t/odd-printing-issue-peeling-on-diagonal-surfaces/962/1 "2014-03-08T18:40:24Z")

</div>

I’ve been printing in White resin since I received the problem, and have been having a couple of issues with peeling.

These prints were at the highest resolution… Any ideas what I might be doing wrong?

~Haje

![](https://support.formlabs.com/attachments/token/qv9zhm414ms1k6e/?name=Photo+08-03-2014+12+21+37.jpg)

![](https://support.formlabs.com/attachments/token/pk2mhnmjqzxi2tz/?name=Photo+08-03-2014+18+19+38.jpg)