# Not sure if Resin in tray is V1 or V2?

**URL:** <https://forum.formlabs.com/t/not-sure-if-resin-in-tray-is-v1-or-v2/4565>\
**Category:** General Discussion\
**Created:** [May 12, 2015, 1:46pm UTC](https://forum.formlabs.com/t/not-sure-if-resin-in-tray-is-v1-or-v2/4565 "2015-05-12T13:46:11Z")\
**Posts on this page:** 8\
**Page:** 1

<div class="post-metadata">

**Author:** ![FormBeast](https://avatars.discourse-cdn.com/v4/letter/f/e99b99/32.png) [@FormBeast](https://forum.formlabs.com/u/FormBeast)\
**Post date:** [May 12, 2015, 1:46pm UTC](https://forum.formlabs.com/t/not-sure-if-resin-in-tray-is-v1-or-v2/4565/1 "2015-05-12T13:46:11Z")

</div>

There is grey resin in the tray and we have both a v1 bottle and v2 bottle. Not sure what the best course of action is but is there a way to test if the resin is v1 or v2. Should I print something the v1 wont be able to print?

---

<div class="post-metadata">

**Author:** ![MarcusKnorr](https://sea1.discourse-cdn.com/flex025/user_avatar/forum.formlabs.com/marcusknorr/32/75_2.png) [@MarcusKnorr](https://forum.formlabs.com/u/MarcusKnorr)\
**Post date:** [May 13, 2015, 1:30pm UTC](https://forum.formlabs.com/t/not-sure-if-resin-in-tray-is-v1-or-v2/4565/2 "2015-05-13T13:30:32Z")

</div>

I would try to look if one is darker than the other. Maybe the only difference in the resins are the amount of pigments?

---

<div class="post-metadata">

**Author:** ![FormBeast](https://avatars.discourse-cdn.com/v4/letter/f/e99b99/32.png) [@FormBeast](https://forum.formlabs.com/u/FormBeast)\
**Post date:** [May 15, 2015, 12:56am UTC](https://forum.formlabs.com/t/not-sure-if-resin-in-tray-is-v1-or-v2/4565/3 "2015-05-15T00:56:52Z")

</div>

It’s possible. The resin in the tray I have a strong feeling it is version 1. It is pretty transparent for grey so maybe v2 they added more pigment? I guess I’ll just have to let it run it’s course then scoop out as much and pour the v2 in.

---

<div class="post-metadata">

**Author:** ![MarcusKnorr](https://sea1.discourse-cdn.com/flex025/user_avatar/forum.formlabs.com/marcusknorr/32/75_2.png) [@MarcusKnorr](https://forum.formlabs.com/u/MarcusKnorr)\
**Post date:** [May 15, 2015, 5:38am UTC](https://forum.formlabs.com/t/not-sure-if-resin-in-tray-is-v1-or-v2/4565/4 "2015-05-15T05:38:56Z")

</div>

I put white pigment into my white resin and it will only print now if I set it to grey or black! The results are nice! I would not be too worried about it - Formlabs is a bit of dramatic when it comes to this settings.

---

<div class="post-metadata">

**Author:** ![FormBeast](https://avatars.discourse-cdn.com/v4/letter/f/e99b99/32.png) [@FormBeast](https://forum.formlabs.com/u/FormBeast)\
**Post date:** [May 15, 2015, 8:49am UTC](https://forum.formlabs.com/t/not-sure-if-resin-in-tray-is-v1-or-v2/4565/5 "2015-05-15T08:49:27Z")

</div>

It prints fine on v1 setting, so will assume its v1. What sort of pigment is that? Might be good for adding to the grey.

---

<div class="post-metadata">

**Author:** ![MarcusKnorr](https://sea1.discourse-cdn.com/flex025/user_avatar/forum.formlabs.com/marcusknorr/32/75_2.png) [@MarcusKnorr](https://forum.formlabs.com/u/MarcusKnorr)\
**Post date:** [May 15, 2015, 1:54pm UTC](https://forum.formlabs.com/t/not-sure-if-resin-in-tray-is-v1-or-v2/4565/6 "2015-05-15T13:54:05Z")

</div>

@Edward\_Peretti

[http://www.makerjuice.com/product-category/pigments/](http://www.makerjuice.com/product-category/pigments/)

…it just works great! 😄

---

<div class="post-metadata">

**Author:** ![FormBeast](https://avatars.discourse-cdn.com/v4/letter/f/e99b99/32.png) [@FormBeast](https://forum.formlabs.com/u/FormBeast)\
**Post date:** [May 15, 2015, 2:04pm UTC](https://forum.formlabs.com/t/not-sure-if-resin-in-tray-is-v1-or-v2/4565/7 "2015-05-15T14:04:29Z")

</div>

I’ve been stupid! It’s actually clear I have V1 and 2. Grey I just got v1 bottles. Problem solved! 😃

Marcus, do you have any images of your prints with added pigment?

---

<div class="post-metadata">

**Author:** ![system](https://us1.discourse-cdn.com/flex025/uploads/formlabs/original/3X/5/b/5bc2bdf993ff27c2e0eecab5010b25626fbb327a.png) [@system](https://forum.formlabs.com/u/system)\
**Post date:** [May 29, 2015, 2:04pm UTC](https://forum.formlabs.com/t/not-sure-if-resin-in-tray-is-v1-or-v2/4565/8 "2015-05-29T14:04:30Z")

</div>

Closed on May 29, 2015, 2:04pm UTC

This topic was automatically closed 14 days after the last reply. New replies are no longer allowed.
