# New Fuse1+

**URL:** <https://forum.formlabs.com/t/new-fuse1/45865>\
**Category:** Form 1/1+\
**Created:** [December 24, 2025, 7:18am UTC](https://forum.formlabs.com/t/new-fuse1/45865 "2025-12-24T07:18:07Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![R2D2](https://avatars.discourse-cdn.com/v4/letter/r/858c86/32.png) [@R2D2](https://forum.formlabs.com/u/R2D2)\
**Post date:** [December 24, 2025, 7:18am UTC](https://forum.formlabs.com/t/new-fuse1/45865/1 "2025-12-24T07:18:07Z")

</div>

Hi,

we have a new Fuse1+30W. Is it mandatory to keep the machine always online, or is it only necessary for register the machine at formlabs? Don´t need the online control.

Thanks in advance

regards

Juergen

---

<div class="post-metadata">

**Author:** ![SMute](https://avatars.discourse-cdn.com/v4/letter/s/ba8739/32.png) [@SMute](https://forum.formlabs.com/u/SMute)\
**Post date:** [December 24, 2025, 10:09pm UTC](https://forum.formlabs.com/t/new-fuse1/45865/2 "2025-12-24T22:09:17Z")

</div>

I don’t think so. As far as I know you only need it connected for remote support and/or to remote upload your prints.

---

<div class="post-metadata">

**Author:** ![system](https://us1.discourse-cdn.com/flex025/uploads/formlabs/original/3X/5/b/5bc2bdf993ff27c2e0eecab5010b25626fbb327a.png) [@system](https://forum.formlabs.com/u/system)\
**Post date:** [June 22, 2026, 10:09pm UTC](https://forum.formlabs.com/t/new-fuse1/45865/3 "2026-06-22T22:09:50Z")

</div>

This topic was automatically closed 180 days after the last reply. New replies are no longer allowed.