# My formlab 1+ printer. Castable resin print alway fail resin tank just chang still fail what can i do all formlab family?

**URL:** <https://forum.formlabs.com/t/my-formlab-1-printer-castable-resin-print-alway-fail-resin-tank-just-chang-still-fail-what-can-i-do-all-formlab-family/14863>\
**Category:** Support & Troubleshooting\
**Created:** [September 7, 2017, 6:39am UTC](https://forum.formlabs.com/t/my-formlab-1-printer-castable-resin-print-alway-fail-resin-tank-just-chang-still-fail-what-can-i-do-all-formlab-family/14863 "2017-09-07T06:39:40Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![Teakuong](https://avatars.discourse-cdn.com/v4/letter/t/db5fbb/32.png) [@Teakuong](https://forum.formlabs.com/u/Teakuong)\
**Post date:** [September 7, 2017, 6:39am UTC](https://forum.formlabs.com/t/my-formlab-1-printer-castable-resin-print-alway-fail-resin-tank-just-chang-still-fail-what-can-i-do-all-formlab-family/14863/1 "2017-09-07T06:39:40Z")

</div>

my printer can’t print FL02 alway fail.  
what should i do all formlab family?  
i really need some help.

---

<div class="post-metadata">

**Author:** ![Frew](https://avatars.discourse-cdn.com/v4/letter/f/c0e974/32.png) [@Frew](https://forum.formlabs.com/u/Frew)\
**Post date:** [September 7, 2017, 4:14pm UTC](https://forum.formlabs.com/t/my-formlab-1-printer-castable-resin-print-alway-fail-resin-tank-just-chang-still-fail-what-can-i-do-all-formlab-family/14863/2 "2017-09-07T16:14:09Z")

</div>

Can you post up some pictures of the error you’re running into as well as your Firmware and PreForm versions? That will help us to troubleshoot this with you.

---

<div class="post-metadata">

**Author:** ![system](https://us1.discourse-cdn.com/flex025/uploads/formlabs/original/3X/5/b/5bc2bdf993ff27c2e0eecab5010b25626fbb327a.png) [@system](https://forum.formlabs.com/u/system)\
**Post date:** [September 21, 2017, 4:14pm UTC](https://forum.formlabs.com/t/my-formlab-1-printer-castable-resin-print-alway-fail-resin-tank-just-chang-still-fail-what-can-i-do-all-formlab-family/14863/3 "2017-09-21T16:14:15Z")

</div>

This topic was automatically closed 14 days after the last reply. New replies are no longer allowed.