# My first print

**URL:** <https://forum.formlabs.com/t/my-first-print/566>\
**Category:** Projects & Prints\
**Created:** [October 14, 2013, 4:16pm UTC](https://forum.formlabs.com/t/my-first-print/566 "2013-10-14T16:16:32Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Gillesalexandre](https://avatars.discourse-cdn.com/v4/letter/g/73ab20/32.png) [@Gillesalexandre](https://forum.formlabs.com/u/Gillesalexandre)\
**Post date:** [October 14, 2013, 4:16pm UTC](https://forum.formlabs.com/t/my-first-print/566/1 "2013-10-14T16:16:32Z")

</div>

Here is my first model

I’m really impress by the quality ( it’s a 100micron setting )

I have primed it in grey ( last picture ) and no sanding or post process have been done

![](https://support.formlabs.com/attachments/token/jlztvmrpcsikjib/?name=impression.jpg)

![](https://support.formlabs.com/attachments/token/sifakynglh1rxog/?name=fille.JPG)

---

<div class="post-metadata">

**Author:** ![RocusHalbasch](https://avatars.discourse-cdn.com/v4/letter/r/35a633/32.png) [@RocusHalbasch](https://forum.formlabs.com/u/RocusHalbasch)\
**Post date:** [October 14, 2013, 11:32pm UTC](https://forum.formlabs.com/t/my-first-print/566/2 "2013-10-14T23:32:17Z")

</div>

That came out great. It would look better in 50 or 25 at 25 you won’t really see the lines of the layers on the skirt and face.