# My biggest sculpture prints
**URL:** https://forum.formlabs.com/t/my-biggest-sculpture-prints/7208
**Category:** Projects & Prints
**Created:** [February 4, 2016, 10:06pm UTC](https://forum.formlabs.com/t/my-biggest-sculpture-prints/7208 "2016-02-04T22:06:16Z")
**Posts on this page:** 11
**Page:** 1
### Author:  [@sasha\_katcher](https://forum.formlabs.com/u/sasha_katcher)
#### Post date: [February 4, 2016, 10:06pm UTC](https://forum.formlabs.com/t/my-biggest-sculpture-prints/7208/1 "2016-02-04T22:06:16Z")
So I have been working on a series of sculptures “abstract animals” for some months now, the peices range from 6"-12"
they all have smooth surfaces so gluing them together is a bit of a pain, a LOT of sanding and work to make sure you can’t see any seams. my work can be viewed at [sashakatcher.com](http://sashakatcher.com)
---
### Author:  [@jkotrosa](https://forum.formlabs.com/u/jkotrosa)
#### Post date: [February 5, 2016, 1:26pm UTC](https://forum.formlabs.com/t/my-biggest-sculpture-prints/7208/2 "2016-02-05T13:26:47Z")
Beautiful artwork design and execution!
Really nice Job
---
### Author:  [@Jory](https://forum.formlabs.com/u/Jory)
#### Post date: [February 5, 2016, 3:52pm UTC](https://forum.formlabs.com/t/my-biggest-sculpture-prints/7208/3 "2016-02-05T15:52:34Z")
Wow, these are amazing!
---
### Author:  [@sasha\_katcher](https://forum.formlabs.com/u/sasha_katcher)
#### Post date: [February 6, 2016, 6:51pm UTC](https://forum.formlabs.com/t/my-biggest-sculpture-prints/7208/4 "2016-02-06T18:51:29Z")
Thank you so much, thats really kind
---
### Author:  [@sasha\_katcher](https://forum.formlabs.com/u/sasha_katcher)
#### Post date: [February 6, 2016, 6:51pm UTC](https://forum.formlabs.com/t/my-biggest-sculpture-prints/7208/5 "2016-02-06T18:51:46Z")
thank you so much!
---
### Author:  [@Anthony\_Huczek](https://forum.formlabs.com/u/Anthony_Huczek)
#### Post date: [February 26, 2016, 4:26pm UTC](https://forum.formlabs.com/t/my-biggest-sculpture-prints/7208/6 "2016-02-26T16:26:12Z")
I love these.
---
### Author:  [@jkotrosa](https://forum.formlabs.com/u/jkotrosa)
#### Post date: [February 26, 2016, 4:39pm UTC](https://forum.formlabs.com/t/my-biggest-sculpture-prints/7208/7 "2016-02-26T16:39:26Z")
Stunningly gorgeous!
---
### Author:  [@sasha\_katcher](https://forum.formlabs.com/u/sasha_katcher)
#### Post date: [February 26, 2016, 6:42pm UTC](https://forum.formlabs.com/t/my-biggest-sculpture-prints/7208/8 "2016-02-26T18:42:43Z")
Thank you!
---
### Author:  [@sasha\_katcher](https://forum.formlabs.com/u/sasha_katcher)
#### Post date: [February 26, 2016, 6:43pm UTC](https://forum.formlabs.com/t/my-biggest-sculpture-prints/7208/9 "2016-02-26T18:43:03Z")
Oh wow, thank you so much!
---
### Author:  [@IsaacKatz](https://forum.formlabs.com/u/IsaacKatz)
#### Post date: [April 13, 2016, 7:35am UTC](https://forum.formlabs.com/t/my-biggest-sculpture-prints/7208/10 "2016-04-13T07:35:47Z")
Very nice work Sasha. I have a question - on parts that require multiple prints such as these, how are you finding the tolerances / dimensional accuracy of the printer? Do they fit together nicely or is it a lot of work just to get them flush to each other (i.e. Before even removing the seam)
It would be great to know your experiences. Please also let me know if you are on a 1+ or 2. Thx!
---
### Author:  [@sasha\_katcher](https://forum.formlabs.com/u/sasha_katcher)
#### Post date: [April 13, 2016, 4:56pm UTC](https://forum.formlabs.com/t/my-biggest-sculpture-prints/7208/12 "2016-04-13T16:56:02Z")
thank you 🙂 For smaller prints they seem to fit together better, but for large ones such as these, not as much, I have to do a lot of sanding and filling to make each piece smooth, really it seems to depend on the pieces, some fit better than others. but i am using Madesolid plastic instead of Form labs plastic, and the former does seem a bit inferior tho I don’t know if that would make a difference in dimensional accuracy. I use the Form1+ ~