# Models printing but dies not?

**URL:** <https://forum.formlabs.com/t/models-printing-but-dies-not/9656>\
**Category:** Form 2\
**Created:** [September 16, 2016, 1:49pm UTC](https://forum.formlabs.com/t/models-printing-but-dies-not/9656 "2016-09-16T13:49:42Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![johnwintersean](https://avatars.discourse-cdn.com/v4/letter/j/eb8c5e/32.png) [@johnwintersean](https://forum.formlabs.com/u/johnwintersean)\
**Post date:** [September 16, 2016, 1:49pm UTC](https://forum.formlabs.com/t/models-printing-but-dies-not/9656/1 "2016-09-16T13:49:42Z")

</div>

Form 2 is printing dental models but not the molar dies, any idea what could be causing this. the STL file is fine as I have printed the same work on other form 2 printers without issue. I am baffled. Anyone have a solution

---

<div class="post-metadata">

**Author:** ![KenCitron](https://sea1.discourse-cdn.com/flex025/user_avatar/forum.formlabs.com/kencitron/32/1741_2.png) [@KenCitron](https://forum.formlabs.com/u/KenCitron)\
**Post date:** [September 16, 2016, 8:53pm UTC](https://forum.formlabs.com/t/models-printing-but-dies-not/9656/2 "2016-09-16T20:53:05Z")

</div>

Do you have any pics of the failed prints and the part in the PreForm software?

---

<div class="post-metadata">

**Author:** ![system](https://us1.discourse-cdn.com/flex025/uploads/formlabs/original/3X/5/b/5bc2bdf993ff27c2e0eecab5010b25626fbb327a.png) [@system](https://forum.formlabs.com/u/system)\
**Post date:** [September 30, 2016, 8:53pm UTC](https://forum.formlabs.com/t/models-printing-but-dies-not/9656/3 "2016-09-30T20:53:07Z")

</div>

This topic was automatically closed 14 days after the last reply. New replies are no longer allowed.