# Model delamination from plate

**URL:** <https://forum.formlabs.com/t/model-delamination-from-plate/16650>\
**Category:** Form 2\
**Created:** [January 5, 2018, 4:44pm UTC](https://forum.formlabs.com/t/model-delamination-from-plate/16650 "2018-01-05T16:44:35Z")\
**Posts on this page:** 1\
**Showing post:** 7

<div class="post-metadata">

**Author:** ![trakaismikus](https://sea1.discourse-cdn.com/flex025/user_avatar/forum.formlabs.com/trakaismikus/32/11358_2.png) [@trakaismikus](https://forum.formlabs.com/u/trakaismikus)\
**Post date:** [January 5, 2018, 6:42pm UTC](https://forum.formlabs.com/t/model-delamination-from-plate/16650/7 "2018-01-05T18:42:33Z")

</div>

Do you have a picture of the results? What material are you using and at what resolution?

We’ve been printing a lot of parts directly on plate and it was fine when we were using Clear V2 but now we cannot get anything to print properly with new print settings. I have a [whole thread](http://forum.formlabs.com/t/impossible-to-print-clear-v4-straight-onto-bed/16595/6) on this issue… Keen to see if you are having same issue or it’s something different.

---

_[View the full topic](https://forum.formlabs.com/t/model-delamination-from-plate/16650)._