# Mixing Resins?! **URL:** \ **Category:** Support & Troubleshooting\ **Created:** [March 12, 2017, 11:24am UTC](https://forum.formlabs.com/t/mixing-resins/12301 "2017-03-12T11:24:00Z")\ **Posts on this page:** 4\ **Page:** 1
**Author:** ![zomorrodjewelry](https://avatars.discourse-cdn.com/v4/letter/z/41988e/32.png) [@zomorrodjewelry](https://forum.formlabs.com/u/zomorrodjewelry)\ **Post date:** [March 12, 2017, 11:24am UTC](https://forum.formlabs.com/t/mixing-resins/12301/1 "2017-03-12T11:24:00Z")
Is it possible to Mix Formlabs resins to get better results? For example,mixing castable with clear or Grey or … or even mix with other resin brands ---
**Author:** ![DavidRosenfeld](https://sea1.discourse-cdn.com/flex025/user_avatar/forum.formlabs.com/davidrosenfeld/32/3570_2.png) [@DavidRosenfeld](https://forum.formlabs.com/u/DavidRosenfeld)\ **Post date:** [March 12, 2017, 12:33pm UTC](https://forum.formlabs.com/t/mixing-resins/12301/2 "2017-03-12T12:33:27Z")
I think it depends on what you properties you are looking for. Generally no, it is not a good idea. ---
**Author:** ![zomorrodjewelry](https://avatars.discourse-cdn.com/v4/letter/z/41988e/32.png) [@zomorrodjewelry](https://forum.formlabs.com/u/zomorrodjewelry)\ **Post date:** [March 12, 2017, 3:43pm UTC](https://forum.formlabs.com/t/mixing-resins/12301/3 "2017-03-12T15:43:59Z")
I’m looking for 25 micron. I’m a jeweler designer. Castable 02 isn’t suitable at all. the gem cuts (holes) are often closed but we didn’t design them closed in Matrix. I’m looking for another resin which is good for jewelry.(I know blue-cast is better than castable resin) ---
**Author:** ![system](https://us1.discourse-cdn.com/flex025/uploads/formlabs/original/3X/5/b/5bc2bdf993ff27c2e0eecab5010b25626fbb327a.png) [@system](https://forum.formlabs.com/u/system)\ **Post date:** [March 26, 2017, 3:44pm UTC](https://forum.formlabs.com/t/mixing-resins/12301/4 "2017-03-26T15:44:19Z")
This topic was automatically closed 14 days after the last reply. New replies are no longer allowed.