# Mix model V2 with model v3

**URL:** <https://forum.formlabs.com/t/mix-model-v2-with-model-v3/33734>\
**Category:** Support & Troubleshooting\
**Created:** [April 13, 2022, 12:18pm UTC](https://forum.formlabs.com/t/mix-model-v2-with-model-v3/33734 "2022-04-13T12:18:27Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![BoldMiniatures](https://sea1.discourse-cdn.com/flex025/user_avatar/forum.formlabs.com/boldminiatures/32/17325_2.png) [@BoldMiniatures](https://forum.formlabs.com/u/BoldMiniatures)\
**Post date:** [April 13, 2022, 12:18pm UTC](https://forum.formlabs.com/t/mix-model-v2-with-model-v3/33734/1 "2022-04-13T12:18:27Z")

</div>

Hi, I have a tank with model V2 and I just ordered more resin which turned to be model v3. I wonder if it’s ok to simply start using the v3 once the V2 cartridge runs out using the same tank.

Thanks

---

<div class="post-metadata">

**Author:** ![system](https://us1.discourse-cdn.com/flex025/uploads/formlabs/original/3X/5/b/5bc2bdf993ff27c2e0eecab5010b25626fbb327a.png) [@system](https://forum.formlabs.com/u/system)\
**Post date:** [October 13, 2022, 12:18am UTC](https://forum.formlabs.com/t/mix-model-v2-with-model-v3/33734/2 "2022-10-13T00:18:35Z")

</div>

Closed on October 13, 2022, 12:18am UTC

This topic was automatically closed 182 days after the last reply. New replies are no longer allowed.