# Missing Resing Tank

**URL:** <https://forum.formlabs.com/t/missing-resing-tank/29625>\
**Category:** 中文版块［Chinese］\
**Created:** [December 17, 2020, 12:14pm UTC](https://forum.formlabs.com/t/missing-resing-tank/29625 "2020-12-17T12:14:11Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Daguo](https://avatars.discourse-cdn.com/v4/letter/d/c68b51/32.png) [@Daguo](https://forum.formlabs.com/u/Daguo)\
**Post date:** [December 17, 2020, 12:14pm UTC](https://forum.formlabs.com/t/missing-resing-tank/29625/1 "2020-12-17T12:14:11Z")

</div>

之前都用OPEN MODE，现在关闭OPEN MODE打印，每次都提示“Missing Resing Tank”。按照手册上的说明，仔细检查了芯片的接触位置，应该没有问题。不清楚到底是什么原因了。

---

<div class="post-metadata">

**Author:** ![DreamEven](https://avatars.discourse-cdn.com/v4/letter/d/85f322/32.png) [@DreamEven](https://forum.formlabs.com/u/DreamEven)\
**Post date:** [December 18, 2020, 9:41pm UTC](https://forum.formlabs.com/t/missing-resing-tank/29625/2 "2020-12-18T21:41:44Z")

</div>

多半是机器或者tank的芯片触点坏了