# Missing and wrong tank message

**URL:** <https://forum.formlabs.com/t/missing-and-wrong-tank-message/19230>\
**Category:** Support & Troubleshooting\
**Created:** [June 17, 2018, 11:36pm UTC](https://forum.formlabs.com/t/missing-and-wrong-tank-message/19230 "2018-06-17T23:36:10Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![Tom\_Parker](https://avatars.discourse-cdn.com/v4/letter/t/cab0a1/32.png) [@Tom\_Parker](https://forum.formlabs.com/u/Tom_Parker)\
**Post date:** [June 17, 2018, 11:36pm UTC](https://forum.formlabs.com/t/missing-and-wrong-tank-message/19230/1 "2018-06-17T23:36:11Z")

</div>

Model#2 up to date on firm and app.  
Things worked fine. Tank looking fogged, decide to buy new 2.1 tank same as old one. Buy FLGPBK04 resin with new tank. install new tank and resin. Get Wrong tank warning, can’t print. Put old 2.1 tank back in Get Missing tank warning. What gives?

I cleaned the chip and contacts and rebooted. No luck, both tanks will not work.

---

<div class="post-metadata">

**Author:** ![Tom\_Parker](https://avatars.discourse-cdn.com/v4/letter/t/cab0a1/32.png) [@Tom\_Parker](https://forum.formlabs.com/u/Tom_Parker)\
**Post date:** [June 18, 2018, 11:25pm UTC](https://forum.formlabs.com/t/missing-and-wrong-tank-message/19230/2 "2018-06-18T23:25:38Z")

</div>

Hi, tom it’s tom. Has anyone helped you yet. Why no tom, but thanks for asking.

---

<div class="post-metadata">

**Author:** ![JohnHue](https://avatars.discourse-cdn.com/v4/letter/j/48db29/32.png) [@JohnHue](https://forum.formlabs.com/u/JohnHue)\
**Post date:** [June 19, 2018, 8:04am UTC](https://forum.formlabs.com/t/missing-and-wrong-tank-message/19230/3 "2018-06-19T08:04:26Z")

</div>

You should contact support, these kind of issues are better managed by them than by forum members.

---

<div class="post-metadata">

**Author:** ![arusso](https://avatars.discourse-cdn.com/v4/letter/a/a183cd/32.png) [@arusso](https://forum.formlabs.com/u/arusso)\
**Post date:** [June 19, 2018, 2:13pm UTC](https://forum.formlabs.com/t/missing-and-wrong-tank-message/19230/4 "2018-06-19T14:13:06Z")

</div>

Hi @Tom_Parker, I also think the Formlabs support team will be best suited to answer your question. I’d suggest creating a support request using the link below, and someone will be in touch to discuss the issue by email:

[https://support.formlabs.com/hc/en-us](https://support.formlabs.com/hc/en-us)

---

<div class="post-metadata">

**Author:** ![system](https://us1.discourse-cdn.com/flex025/uploads/formlabs/original/3X/5/b/5bc2bdf993ff27c2e0eecab5010b25626fbb327a.png) [@system](https://forum.formlabs.com/u/system)\
**Post date:** [July 3, 2018, 2:13pm UTC](https://forum.formlabs.com/t/missing-and-wrong-tank-message/19230/5 "2018-07-03T14:13:11Z")

</div>

Closed on July 3, 2018, 2:13pm UTC

This topic was automatically closed 14 days after the last reply. New replies are no longer allowed.
