# Minimum Feature Size Test

**URL:** <https://forum.formlabs.com/t/minimum-feature-size-test/3805>\
**Category:** General Discussion\
**Created:** [February 26, 2015, 4:39pm UTC](https://forum.formlabs.com/t/minimum-feature-size-test/3805 "2015-02-26T16:39:21Z")\
**Posts on this page:** 1\
**Showing post:** 34

<div class="post-metadata">

**Author:** ![KjellNilsson](https://avatars.discourse-cdn.com/v4/letter/k/a9adbd/32.png) [@KjellNilsson](https://forum.formlabs.com/u/KjellNilsson)\
**Post date:** [March 1, 2015, 3:11pm UTC](https://forum.formlabs.com/t/minimum-feature-size-test/3805/34 "2015-03-01T15:11:55Z")

</div>

Here is one more test printed at 100 micron, black. Dimensions measured with digital caliper:

Round pillars, 0.27, 0.54, 0.88, 1.15 and 1.45  
Sqare pillars, 0.26.x 0.27, 0.52 x0.50, 0.85 x 0.82, 1.18 x 1.15 and 1.48 x 1.42  
Walls, 0.36, 0.55, 0.95, 1.17 and 1.45

![](http://forum.formlabs.com/uploads/formlabs/2823/fa6b7b1d7ce2d83d.JPG)

![](http://forum.formlabs.com/uploads/formlabs/2824/73a9cbe329a62694.JPG)

![](http://forum.formlabs.com/uploads/formlabs/2825/c327a5e8fd14c676.JPG)

---

_[View the full topic](https://forum.formlabs.com/t/minimum-feature-size-test/3805)._