# Measurements errors **URL:** \ **Category:** Form 1/1+\ **Created:** [July 27, 2022, 7:52pm UTC](https://forum.formlabs.com/t/measurements-errors/34464 "2022-07-27T19:52:01Z")\ **Posts on this page:** 6\ **Page:** 1
**Author:** ![OhadNataf](https://avatars.discourse-cdn.com/v4/letter/o/9dc877/32.png) [@OhadNataf](https://forum.formlabs.com/u/OhadNataf)\ **Post date:** [July 27, 2022, 7:52pm UTC](https://forum.formlabs.com/t/measurements-errors/34464/1 "2022-07-27T19:52:01Z")
Hi, after calibrating and a few successful prints, I discovered measurement errors on the complete printed part in each print. I’m not sure what the reason could be, and I’d love to hear possible ideas. Thank you in advance. ---
**Author:** ![Randy\_Cohen](https://sea1.discourse-cdn.com/flex025/user_avatar/forum.formlabs.com/randy_cohen/32/1500_2.png) [@Randy\_Cohen](https://forum.formlabs.com/u/Randy_Cohen)\ **Post date:** [July 28, 2022, 4:05pm UTC](https://forum.formlabs.com/t/measurements-errors/34464/2 "2022-07-28T16:05:22Z")
Best idea: provide details. No one can say anything based on the superficial level of details you have provided. Exactly what were the errors? Pictures? ---
**Author:** ![Corey\_M](https://sea1.discourse-cdn.com/flex025/user_avatar/forum.formlabs.com/corey_m/32/18987_2.png) [@Corey\_M](https://forum.formlabs.com/u/Corey_M)\ **Post date:** [July 28, 2022, 5:38pm UTC](https://forum.formlabs.com/t/measurements-errors/34464/3 "2022-07-28T17:38:28Z")
Hi @OhadNataf, @Randy_Cohen is right that we would need a bit more information to go off of; is the printed part a different size? Are there missing segments? Are there slices through the part? Anything along these lines (especially photos of the parts) will allow us to help you further. ---
**Author:** ![OhadNataf](https://avatars.discourse-cdn.com/v4/letter/o/9dc877/32.png) [@OhadNataf](https://forum.formlabs.com/u/OhadNataf)\ **Post date:** [July 28, 2022, 6:04pm UTC](https://forum.formlabs.com/t/measurements-errors/34464/4 "2022-07-28T18:04:46Z")
Thank you my friend, you are right I should have attached the photos I already took for this 🙃 Here there are: ![צילום מסך 2022-07-27 230153](https://us1.discourse-cdn.com/flex025/uploads/formlabs/original/3X/2/7/274e97e657352aecbe452e880178328dcac73f11.png) ![צילום מסך 2022-07-27 230605](https://us1.discourse-cdn.com/flex025/uploads/formlabs/original/3X/9/e/9eb6ea04da0367675ec34c173c61f861988fa6f8.png) ![295759535_10220491881997783_3110973856790389302_n](https://us1.discourse-cdn.com/flex025/uploads/formlabs/original/3X/d/4/d40465b7d86b7f05c966ed00d4f7b47d344401a4.jpeg) ![295986904_10220491883197813_5061711982408731180_n](https://us1.discourse-cdn.com/flex025/uploads/formlabs/original/3X/1/5/15acc95a942b430b29543d2e9b5835fd4d1645fb.jpeg) ---
**Author:** ![Randy\_Cohen](https://sea1.discourse-cdn.com/flex025/user_avatar/forum.formlabs.com/randy_cohen/32/1500_2.png) [@Randy\_Cohen](https://forum.formlabs.com/u/Randy_Cohen)\ **Post date:** [July 28, 2022, 6:11pm UTC](https://forum.formlabs.com/t/measurements-errors/34464/5 "2022-07-28T18:11:16Z")
I’m pretty sure FL is going to say that they can’t help you because you’re not using FL resin. You should buy some _real_ FL Clear and try your print with that. If it still deforms, then FL will, I am sure, be happy to help. Barring that, your next best option is to start a thread with the name of the resin you’re using and see if anyone else is using it and if they can offer some advice. ---
**Author:** ![Corey\_M](https://sea1.discourse-cdn.com/flex025/user_avatar/forum.formlabs.com/corey_m/32/18987_2.png) [@Corey\_M](https://forum.formlabs.com/u/Corey_M)\ **Post date:** [July 29, 2022, 1:15pm UTC](https://forum.formlabs.com/t/measurements-errors/34464/6 "2022-07-29T13:15:08Z")
Hi @OhadNataf, Randy is right in that we unfortunately can’t help too much with third party resins since we do not manufacture them or know the specific material makeup of them; opening a thread to discuss with folks who might’ve used that resin type would likely be your best bet (or seeing maybe if that manufacturer has a forum or FAQ page). Best of luck and sorry that I can’t be of much more help.