# Material density

**URL:** <https://forum.formlabs.com/t/material-density/18825>\
**Category:** Form 2\
**Created:** [May 18, 2018, 4:58pm UTC](https://forum.formlabs.com/t/material-density/18825 "2018-05-18T16:58:28Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![czarsimon](https://avatars.discourse-cdn.com/v4/letter/c/ea5d25/32.png) [@czarsimon](https://forum.formlabs.com/u/czarsimon)\
**Post date:** [May 18, 2018, 4:58pm UTC](https://forum.formlabs.com/t/material-density/18825/1 "2018-05-18T16:58:28Z")

</div>

Hi, I’m looking for information regarding the densities of the materials, specifically Tough V5. I was able to find a datasheet for the V3 which states the density is 1.09 to 1.12 g/cm3 (not sure if the units are correct but I saw other datasheets use it). I was wondering if it’s the same for the V5 material as it does not state it in the most recent datasheet? Thank you 🙂

---

<div class="post-metadata">

**Author:** ![arusso](https://avatars.discourse-cdn.com/v4/letter/a/a183cd/32.png) [@arusso](https://forum.formlabs.com/u/arusso)\
**Post date:** [May 18, 2018, 7:55pm UTC](https://forum.formlabs.com/t/material-density/18825/2 "2018-05-18T19:55:52Z")

</div>

Hi @czarsimon, it sounds like you grabbed this data from a materials safety data sheet for the liquid resin. Are you actually interested in the density of the solid cured resin? I asked someone from our materials team if they can weigh in here 🙂

---

<div class="post-metadata">

**Author:** ![czarsimon](https://avatars.discourse-cdn.com/v4/letter/c/ea5d25/32.png) [@czarsimon](https://forum.formlabs.com/u/czarsimon)\
**Post date:** [May 18, 2018, 9:59pm UTC](https://forum.formlabs.com/t/material-density/18825/3 "2018-05-18T21:59:04Z")

</div>

Hi @arusso yes I’m after the density of the solid cured material, I appreciate your help 🙂

---

<div class="post-metadata">

**Author:** ![system](https://us1.discourse-cdn.com/flex025/uploads/formlabs/original/3X/5/b/5bc2bdf993ff27c2e0eecab5010b25626fbb327a.png) [@system](https://forum.formlabs.com/u/system)\
**Post date:** [June 1, 2018, 9:59pm UTC](https://forum.formlabs.com/t/material-density/18825/4 "2018-06-01T21:59:11Z")

</div>

Closed on June 1, 2018, 9:59pm UTC

This topic was automatically closed 14 days after the last reply. New replies are no longer allowed.