# Manual resin preheat trigger

**URL:** <https://forum.formlabs.com/t/manual-resin-preheat-trigger/7609>\
**Category:** Feature Requests & Ideas\
**Created:** [March 29, 2016, 1:27am UTC](https://forum.formlabs.com/t/manual-resin-preheat-trigger/7609 "2016-03-29T01:27:55Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Ante\_Vukorepa](https://sea1.discourse-cdn.com/flex025/user_avatar/forum.formlabs.com/ante_vukorepa/32/18125_2.png) [@Ante\_Vukorepa](https://forum.formlabs.com/u/Ante_Vukorepa)\
**Post date:** [March 29, 2016, 1:27am UTC](https://forum.formlabs.com/t/manual-resin-preheat-trigger/7609/1 "2016-03-29T01:27:55Z")

</div>

Since heating the resin takes quite a bit of time, it would be great if i could fire up a pre-heat cycle manually, while i set up the print in PreForm, so it’s ready to go when i’m ready to send it to the printer.

Would save quite a bit of time.

---

<div class="post-metadata">

**Author:** ![system](https://us1.discourse-cdn.com/flex025/uploads/formlabs/original/3X/5/b/5bc2bdf993ff27c2e0eecab5010b25626fbb327a.png) [@system](https://forum.formlabs.com/u/system)\
**Post date:** [April 12, 2016, 1:28am UTC](https://forum.formlabs.com/t/manual-resin-preheat-trigger/7609/2 "2016-04-12T01:28:09Z")

</div>

This topic was automatically closed 14 days after the last reply. New replies are no longer allowed.