# MakerJuice SF Yellow (OpenFL ini) included

**URL:** <https://forum.formlabs.com/t/makerjuice-sf-yellow-openfl-ini-included/18224>\
**Category:** Experimental\
**Created:** [April 6, 2018, 7:34pm UTC](https://forum.formlabs.com/t/makerjuice-sf-yellow-openfl-ini-included/18224 "2018-04-06T19:34:39Z")\
**Posts on this page:** 1\
**Showing post:** 14

<div class="post-metadata">

**Author:** ![HTL](https://avatars.discourse-cdn.com/v4/letter/h/5f8ce5/32.png) [@HTL](https://forum.formlabs.com/u/HTL)\
**Post date:** [April 20, 2018, 1:58pm UTC](https://forum.formlabs.com/t/makerjuice-sf-yellow-openfl-ini-included/18224/14 "2018-04-20T13:58:02Z")

</div>

Compare the original material file and the documented file.

Also the needed exposures for the above should be closer to the medium exposure material file I created, the exposures are way too high (most 3rd party resins are more sensitive than Formlabs resins, some like NextDent Ortho by a lot).

The basic material files (documented, low medium and high exposure) can be downloaded as a zip file here: [[http://projectsinterestsandetcetera.com/?post\_type=wpdmpro&p=1668&preview=true](http://projectsinterestsandetcetera.com/?post_type=wpdmpro&p=1668&preview=true)]

The original Formlabs Form\_1+\_FLGPCL02\_100-1.ini if you want to compare it to my documented file: [http://projectsinterestsandetcetera.com/download/original-form\_1\_flgpcl02\_100-1-ini-material-file/](http://projectsinterestsandetcetera.com/download/original-form_1_flgpcl02_100-1-ini-material-file/)

For tips on manipulating material file exposures: [OpenFL Material Files and technical info from flexvat.com](http://forum.formlabs.com/t/openfl-material-files-and-technical-info-from-flexvat-com/18369/2) this is the second post in the topic.

---

_[View the full topic](https://forum.formlabs.com/t/makerjuice-sf-yellow-openfl-ini-included/18224)._