# Maker Juice print failures

**URL:** <https://forum.formlabs.com/t/maker-juice-print-failures/9672>\
**Category:** General Discussion\
**Created:** [September 17, 2016, 6:10am UTC](https://forum.formlabs.com/t/maker-juice-print-failures/9672 "2016-09-17T06:10:12Z")\
**Posts on this page:** 1\
**Showing post:** 9

<div class="post-metadata">

**Author:** ![JasonSpiller](https://avatars.discourse-cdn.com/v4/letter/j/f14d63/32.png) [@JasonSpiller](https://forum.formlabs.com/u/JasonSpiller)\
**Post date:** [September 18, 2016, 11:11pm UTC](https://forum.formlabs.com/t/maker-juice-print-failures/9672/9 "2016-09-18T23:11:49Z")

</div>

This guy was printed at 1.5mm thick with photocentic firm grey.

> [@Large 1/6 Scale Viking figure](http://forum.formlabs.com/t/large-1-6-scale-viking-figure/8766):
>
> Hi I’m about to release this guy, 350mm tall, 330mm across printed on my form2 at 50micron with photocentric firm grey resin. He’ll be molded and cast in solid resin for retail. Painted pics to follow.

---

_[View the full topic](https://forum.formlabs.com/t/maker-juice-print-failures/9672)._
