# Looking for reviews of Fuse 1 and Fuse +

**URL:** <https://forum.formlabs.com/t/looking-for-reviews-of-fuse-1-and-fuse/36387>\
**Category:** General Discussion\
**Created:** [June 15, 2023, 11:29am UTC](https://forum.formlabs.com/t/looking-for-reviews-of-fuse-1-and-fuse/36387 "2023-06-15T11:29:35Z")\
**Posts on this page:** 1\
**Showing post:** 7

<div class="post-metadata">

**Author:** ![LOCjon](https://avatars.discourse-cdn.com/v4/letter/l/9fc348/32.png) [@LOCjon](https://forum.formlabs.com/u/LOCjon)\
**Post date:** [July 5, 2023, 10:05am UTC](https://forum.formlabs.com/t/looking-for-reviews-of-fuse-1-and-fuse/36387/7 "2023-07-05T10:05:24Z")

</div>

Hi, I’ve detailed a recent serious downtime issue with our Fuse 1 here:

> [@FAULTY Fuse 1](https://forum.formlabs.com/t/faulty-fuse-1/36489):
>
> After two months of unsuccessful prints on our nearly one-year-old Formlabs Fuse 1, I wanted to share my experience and continue documenting it in order to connect with other users facing similar issues. Since mid-May 2023, we have been encountering significant problems with severely overbaked prints. This has reached a point where post-processing becomes either too challenging or even hazardous. All our prints have failed quality control or had to be aborted due to the powder within the entire…

Happy to provide more information upon request.

---

_[View the full topic](https://forum.formlabs.com/t/looking-for-reviews-of-fuse-1-and-fuse/36387)._
