# Leveling tool form 2

**URL:** <https://forum.formlabs.com/t/leveling-tool-form-2/27572>\
**Category:** Form 2\
**Created:** [May 5, 2020, 5:44pm UTC](https://forum.formlabs.com/t/leveling-tool-form-2/27572 "2020-05-05T17:44:41Z")\
**Posts on this page:** 1\
**Showing post:** 3

<div class="post-metadata">

**Author:** ![rkagerer](https://avatars.discourse-cdn.com/v4/letter/r/439d5e/32.png) [@rkagerer](https://forum.formlabs.com/u/rkagerer)\
**Post date:** [May 5, 2020, 7:58pm UTC](https://forum.formlabs.com/t/leveling-tool-form-2/27572/3 "2020-05-05T19:58:13Z")

</div>

I think he’s talking about this:

[![](https://i.imgur.com/cwEzisl.png) ](https://i.imgur.com/cwEzisl.png)

To be honest I don’t even use mine. I find it quicker just to tilt the printer up a bit and adjust the feet by hand. After a while you get a feel for just how many turns (or fractional turns) you need to hit the bullseye.

If you really want one I might have an extra I could sell (or maybe someone could measure theirs and send you the dimensions to print one).

EDIT: Here’s the post where @CraigBroady posted the STL. His original link is dead, but if you scroll down there are some others.

> [@How do you use your Form 2 leveling tools?](http://forum.formlabs.com/t/how-do-you-use-your-form-2-leveling-tools/7653/13):
>
> Thanks again for all the feedback! For those of you who want more leveling tools, you can now find a link to the STL of a printable leveling tool [here](https://dl.dropboxusercontent.com/u/372224/Form%202%20Leveling%20Tool.STL). I recommend orienting it as in the picture below and using default support structure settings—this consumes about 40mL of resin. Use any general purpose resin, with a 100µm layer height (for a print time of about 5h30m), and post-cure after cleaning.

---

_[View the full topic](https://forum.formlabs.com/t/leveling-tool-form-2/27572)._