# Latest form 1+ Firmware as of December 2016?

**URL:** <https://forum.formlabs.com/t/latest-form-1-firmware-as-of-december-2016/10892>\
**Category:** Form 1/1+\
**Created:** [December 11, 2016, 11:00pm UTC](https://forum.formlabs.com/t/latest-form-1-firmware-as-of-december-2016/10892 "2016-12-11T23:00:40Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![chris\_ell](https://avatars.discourse-cdn.com/v4/letter/c/b487fb/32.png) [@chris\_ell](https://forum.formlabs.com/u/chris_ell)\
**Post date:** [December 11, 2016, 11:00pm UTC](https://forum.formlabs.com/t/latest-form-1-firmware-as-of-december-2016/10892/1 "2016-12-11T23:00:40Z")

</div>

My printer is saying it is 1.40 which seems to be out of date. In Preform, it says it performed an update, but it doesn’t seem to change. Is 1.40 up-to-date for the Form 1+? Thanks.

---

<div class="post-metadata">

**Author:** ![kevinduhe](https://sea1.discourse-cdn.com/flex025/user_avatar/forum.formlabs.com/kevinduhe/32/7999_2.png) [@kevinduhe](https://forum.formlabs.com/u/kevinduhe)\
**Post date:** [December 12, 2016, 5:03pm UTC](https://forum.formlabs.com/t/latest-form-1-firmware-as-of-december-2016/10892/2 "2016-12-12T17:03:26Z")

</div>

According to the [release notes](https://formlabs.com/tools/preform/release-notes/) 1.40 is the latest and greatest for 1+ users. I can’t verify this as I am not a 1+ owner. It could be that there is a minor update it still needs (1.40.xx.xx). Maybe a 1+ user or FL employee can verify that for you.

---

<div class="post-metadata">

**Author:** ![DavidRosenfeld](https://sea1.discourse-cdn.com/flex025/user_avatar/forum.formlabs.com/davidrosenfeld/32/3570_2.png) [@DavidRosenfeld](https://forum.formlabs.com/u/DavidRosenfeld)\
**Post date:** [December 12, 2016, 9:44pm UTC](https://forum.formlabs.com/t/latest-form-1-firmware-as-of-december-2016/10892/3 "2016-12-12T21:44:09Z")

</div>

My firmware has been 1.40 and to the best of my knowledge is the latest release. It has been 1.40 for a very long time. No need to update it.

---

<div class="post-metadata">

**Author:** ![chris\_ell](https://avatars.discourse-cdn.com/v4/letter/c/b487fb/32.png) [@chris\_ell](https://forum.formlabs.com/u/chris_ell)\
**Post date:** [December 12, 2016, 10:38pm UTC](https://forum.formlabs.com/t/latest-form-1-firmware-as-of-december-2016/10892/4 "2016-12-12T22:38:16Z")

</div>

Cool. Sounds like 1.40 it is. Thanks everyone.

---

<div class="post-metadata">

**Author:** ![system](https://us1.discourse-cdn.com/flex025/uploads/formlabs/original/3X/5/b/5bc2bdf993ff27c2e0eecab5010b25626fbb327a.png) [@system](https://forum.formlabs.com/u/system)\
**Post date:** [December 28, 2016, 4:38am UTC](https://forum.formlabs.com/t/latest-form-1-firmware-as-of-december-2016/10892/5 "2016-12-28T04:38:33Z")

</div>

Closed on December 28, 2016, 4:38am UTC

This topic was automatically closed 15 days after the last reply. New replies are no longer allowed.