# Is it normal process?

**URL:** <https://forum.formlabs.com/t/is-it-normal-process/724>\
**Category:** Support & Troubleshooting\
**Created:** [December 22, 2013, 4:05am UTC](https://forum.formlabs.com/t/is-it-normal-process/724 "2013-12-22T04:05:59Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![SatoshiToriumi](https://avatars.discourse-cdn.com/v4/letter/s/eada6e/32.png) [@SatoshiToriumi](https://forum.formlabs.com/u/SatoshiToriumi)\
**Post date:** [December 22, 2013, 4:05am UTC](https://forum.formlabs.com/t/is-it-normal-process/724/1 "2013-12-22T04:05:59Z")

</div>

Hi all  
I have&nbsp;Troubles with model adhering to build platform and I found the same issue in this forum.

But I think it is differnce from those issue.

I could print first time, but from next time, I failed to print because the model didn’t adhere to build platform.

I tried 0.025mm, 0.05mm,0.1mm, and both resin, spare resin tank and build platform but I failed.

I doubt that resin tank always tilt to the build platform within 0.5mm(attached the photo). Is it normal?

Could you advice it.

thanks

![](https://support.formlabs.com/attachments/token/dupcuy094xusysh/?name=IMG_2748.JPG)