# Inside the New PreForm and Firmware

**URL:** <https://forum.formlabs.com/t/inside-the-new-preform-and-firmware/8595>\
**Category:** Formlabs News\
**Created:** [June 14, 2016, 8:03pm UTC](https://forum.formlabs.com/t/inside-the-new-preform-and-firmware/8595 "2016-06-14T20:03:03Z")\
**Posts on this page:** 1\
**Showing post:** 5

<div class="post-metadata">

**Author:** ![David\_Maillot](https://sea1.discourse-cdn.com/flex025/user_avatar/forum.formlabs.com/david_maillot/32/6489_2.png) [@David\_Maillot](https://forum.formlabs.com/u/David_Maillot)\
**Post date:** [June 16, 2016, 10:21am UTC](https://forum.formlabs.com/t/inside-the-new-preform-and-firmware/8595/5 "2016-06-16T10:21:30Z")

</div>

> [@Firmware 1.6 frozen](http://forum.formlabs.com/t/firmware-1-6-frozen/8600/2):
>
> Problem solved following formlabs instructions. “Please unplug your Form 2, wait a few minutes, plug it back in, and start again to re-install the firmware from PreForm.” Form2 upgraded and back to work.

---

_[View the full topic](https://forum.formlabs.com/t/inside-the-new-preform-and-firmware/8595)._