# Indirect Bonding Adhesive

**URL:** <https://forum.formlabs.com/t/indirect-bonding-adhesive/34672>\
**Category:** Support & Troubleshooting\
**Created:** [September 1, 2022, 8:36pm UTC](https://forum.formlabs.com/t/indirect-bonding-adhesive/34672 "2022-09-01T20:36:55Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![backusortho](https://avatars.discourse-cdn.com/v4/letter/b/85f322/32.png) [@backusortho](https://forum.formlabs.com/u/backusortho)\
**Post date:** [September 1, 2022, 8:36pm UTC](https://forum.formlabs.com/t/indirect-bonding-adhesive/34672/1 "2022-09-01T20:36:55Z")

</div>

Wanting to know what type of bracket adhesive someone is using to place on the bracket pad for Indirect Bonding Trays (IBT Resin)?

---

<div class="post-metadata">

**Author:** ![Corey\_M](https://sea1.discourse-cdn.com/flex025/user_avatar/forum.formlabs.com/corey_m/32/18987_2.png) [@Corey\_M](https://forum.formlabs.com/u/Corey_M)\
**Post date:** [September 8, 2022, 6:11pm UTC](https://forum.formlabs.com/t/indirect-bonding-adhesive/34672/2 "2022-09-08T18:11:15Z")

</div>

Hi @backusortho,

I don’t have any recommendations for this particular use-case, unfortunately, but wanted to bump this post so it is more likely to be seen and help get you an answer. I hope someone from the community can assist further!

---

<div class="post-metadata">

**Author:** ![backusortho](https://avatars.discourse-cdn.com/v4/letter/b/85f322/32.png) [@backusortho](https://forum.formlabs.com/u/backusortho)\
**Post date:** [September 12, 2022, 3:02pm UTC](https://forum.formlabs.com/t/indirect-bonding-adhesive/34672/3 "2022-09-12T15:02:04Z")

</div>

A little disappointed no one is sharing what type of bracket adhesive is being used. We can’t be the only practice using the IBT Resin.

---

<div class="post-metadata">

**Author:** ![Corey\_M](https://sea1.discourse-cdn.com/flex025/user_avatar/forum.formlabs.com/corey_m/32/18987_2.png) [@Corey\_M](https://forum.formlabs.com/u/Corey_M)\
**Post date:** [September 15, 2022, 3:13pm UTC](https://forum.formlabs.com/t/indirect-bonding-adhesive/34672/4 "2022-09-15T15:13:54Z")

</div>

Hi @backusortho,

I’m sorry to see that this post hasn’t gotten any responses yet; I will say that this is a fairly specific question on a general Troubleshooting section of our forums. If you are part of any Dental-specific forums, that might garner more responses. I am sorry that I don’t have any personal experience here.

---

<div class="post-metadata">

**Author:** ![system](https://us1.discourse-cdn.com/flex025/uploads/formlabs/original/3X/5/b/5bc2bdf993ff27c2e0eecab5010b25626fbb327a.png) [@system](https://forum.formlabs.com/u/system)\
**Post date:** [March 17, 2023, 3:14am UTC](https://forum.formlabs.com/t/indirect-bonding-adhesive/34672/5 "2023-03-17T03:14:42Z")

</div>

This topic was automatically closed 182 days after the last reply. New replies are no longer allowed.