# Impresion hueca en su interior **URL:** \ **Category:** Feature Requests & Ideas\ **Created:** [October 14, 2014, 4:37pm UTC](https://forum.formlabs.com/t/impresion-hueca-en-su-interior/2270 "2014-10-14T16:37:22Z")\ **Posts on this page:** 4\ **Page:** 1
**Author:** ![juan\_manuel](https://avatars.discourse-cdn.com/v4/letter/j/7ab992/32.png) [@juan\_manuel](https://forum.formlabs.com/u/juan_manuel)\ **Post date:** [October 14, 2014, 4:37pm UTC](https://forum.formlabs.com/t/impresion-hueca-en-su-interior/2270/1 "2014-10-14T16:37:22Z")
good morning, my name is juan manuel holes, of Colombia, I am closely following the work done with the printer, and I have a question, is it possible to print the remaining hollow parts inside? thank you ---
**Author:** ![Jory](https://sea1.discourse-cdn.com/flex025/user_avatar/forum.formlabs.com/jory/32/229_2.png) [@Jory](https://forum.formlabs.com/u/Jory)\ **Post date:** [October 14, 2014, 9:37pm UTC](https://forum.formlabs.com/t/impresion-hueca-en-su-interior/2270/2 "2014-10-14T21:37:12Z")
Hello Juan! It is indeed possible to print hollow parts, but our software does not have an auto hollowing feature. Is this what you are asking? ---
**Author:** ![juan\_manuel](https://avatars.discourse-cdn.com/v4/letter/j/7ab992/32.png) [@juan\_manuel](https://forum.formlabs.com/u/juan_manuel)\ **Post date:** [October 14, 2014, 9:41pm UTC](https://forum.formlabs.com/t/impresion-hueca-en-su-interior/2270/3 "2014-10-14T21:41:30Z")
correct, the software allows to empty the piece. ---
**Author:** ![Jory](https://sea1.discourse-cdn.com/flex025/user_avatar/forum.formlabs.com/jory/32/229_2.png) [@Jory](https://forum.formlabs.com/u/Jory)\ **Post date:** [October 14, 2014, 10:21pm UTC](https://forum.formlabs.com/t/impresion-hueca-en-su-interior/2270/4 "2014-10-14T22:21:41Z")
So right now, Preform does not allow you to hollow a model. However, there are lots of software options out there that can help with that process!