# I almost have this worked out

**URL:** <https://forum.formlabs.com/t/i-almost-have-this-worked-out/13329>\
**Category:** Projects & Prints\
**Created:** [May 17, 2017, 12:17am UTC](https://forum.formlabs.com/t/i-almost-have-this-worked-out/13329 "2017-05-17T00:17:05Z")\
**Posts on this page:** 1\
**Showing post:** 7

<div class="post-metadata">

**Author:** ![Marci888](https://avatars.discourse-cdn.com/v4/letter/m/df788c/32.png) [@Marci888](https://forum.formlabs.com/u/Marci888)\
**Post date:** [May 21, 2017, 1:57am UTC](https://forum.formlabs.com/t/i-almost-have-this-worked-out/13329/7 "2017-05-21T01:57:35Z")

</div>

Hi Kathleen,

Beautiful work!! 🙂  
You should try Bluecast castable resin for jewelry. It needs NO curing at all and prints really well, Only needs a fast alcohol bath and air dry for a 30 minutes and it is ready to be cast. It can be cast with regular wax burnout schedules or even a fast 2 hour burnout. I’ve had my pieces cast by 2 different casting houses with no issues at all. It is cheaper than formlabs castable resin and produces clean and smooth castings. Check their information here: [Test of Blue-Cast: compatible and castable resin](http://forum.formlabs.com/t/test-of-blue-cast-compatible-and-castable-resin/10257/9) or on facebook [https://www.facebook.com/BlueCast3d/](https://www.facebook.com/BlueCast3d/)  
The Bluecast resin is sold by 3D Garage and their customer service is fantastic, check them out [https://www.facebook.com/3dgarage.bg/](https://www.facebook.com/3dgarage.bg/)  
Good luck!

---

_[View the full topic](https://forum.formlabs.com/t/i-almost-have-this-worked-out/13329)._