# HULK Model **URL:** \ **Category:** Projects & Prints\ **Created:** [May 31, 2016, 8:42pm UTC](https://forum.formlabs.com/t/hulk-model/8396 "2016-05-31T20:42:32Z")\ **Posts on this page:** 13\ **Page:** 1
**Author:** ![David\_Valle\_DGA](https://sea1.discourse-cdn.com/flex025/user_avatar/forum.formlabs.com/david_valle_dga/32/1742_2.png) [@David\_Valle\_DGA](https://forum.formlabs.com/u/David_Valle_DGA)\ **Post date:** [May 31, 2016, 8:42pm UTC](https://forum.formlabs.com/t/hulk-model/8396/1 "2016-05-31T20:42:32Z")
Recieved the form 2 a few weeks ago and it is pretty good! No fails so far… Here is my work. I hope you like it! ![](https://us1.discourse-cdn.com/flex025/uploads/formlabs/original/2X/f/fa758ab832d03efc1f718b18ee6a6badc05f5909.JPG) ![](https://us1.discourse-cdn.com/flex025/uploads/formlabs/original/2X/c/cafe5b4d651b2f3119358957d7cb3ba35ca50606.JPG) ![](https://us1.discourse-cdn.com/flex025/uploads/formlabs/original/2X/7/74430fdb5334745297527be029f5a9bcfeebf780.JPG) ![](https://us1.discourse-cdn.com/flex025/uploads/formlabs/original/2X/3/3204b8e73c23aa2e827eb4fee00eea2e416d9c83.JPG) ![](https://us1.discourse-cdn.com/flex025/uploads/formlabs/original/2X/0/0050ae94a3b42754c2677335347fa004531f5691.JPG) ![](https://us1.discourse-cdn.com/flex025/uploads/formlabs/original/2X/d/dc93a2f19337d2b89498cc9a6bb76454349122b7.JPG) ![](https://us1.discourse-cdn.com/flex025/uploads/formlabs/original/2X/5/582d9da6a7c4a16f6cf1e4a3f1fd51325b50984d.JPG) ---
**Author:** ![gregor616](https://sea1.discourse-cdn.com/flex025/user_avatar/forum.formlabs.com/gregor616/32/6239_2.png) [@gregor616](https://forum.formlabs.com/u/gregor616)\ **Post date:** [May 31, 2016, 11:43pm UTC](https://forum.formlabs.com/t/hulk-model/8396/2 "2016-05-31T23:43:46Z")
wow that is impressive, nice work on the painting ---
**Author:** ![katkramer](https://sea1.discourse-cdn.com/flex025/user_avatar/forum.formlabs.com/katkramer/32/15796_2.png) [@katkramer](https://forum.formlabs.com/u/katkramer)\ **Post date:** [June 1, 2016, 2:05am UTC](https://forum.formlabs.com/t/hulk-model/8396/3 "2016-06-01T02:05:02Z")
That’s insane!!! Nicely done, thanks for sharing! ---
**Author:** ![itailu](https://avatars.discourse-cdn.com/v4/letter/i/8797f3/32.png) [@itailu](https://forum.formlabs.com/u/itailu)\ **Post date:** [June 1, 2016, 3:25am UTC](https://forum.formlabs.com/t/hulk-model/8396/4 "2016-06-01T03:25:35Z")
very cool!! ---
**Author:** ![David\_Valle\_DGA](https://sea1.discourse-cdn.com/flex025/user_avatar/forum.formlabs.com/david_valle_dga/32/1742_2.png) [@David\_Valle\_DGA](https://forum.formlabs.com/u/David_Valle_DGA)\ **Post date:** [June 1, 2016, 11:05am UTC](https://forum.formlabs.com/t/hulk-model/8396/5 "2016-06-01T11:05:40Z")
I’m Happy for formlabs to have the model to show at the show. 🙂 They will need to arrange collection from London. Please let me know ---
**Author:** ![aad345](https://sea1.discourse-cdn.com/flex025/user_avatar/forum.formlabs.com/aad345/32/5444_2.png) [@aad345](https://forum.formlabs.com/u/aad345)\ **Post date:** [June 1, 2016, 11:36am UTC](https://forum.formlabs.com/t/hulk-model/8396/6 "2016-06-01T11:36:16Z")
Wow! Where can I find a detailed tutorial on how to paint my models? ---
**Author:** ![Schoner](https://sea1.discourse-cdn.com/flex025/user_avatar/forum.formlabs.com/schoner/32/8152_2.png) [@Schoner](https://forum.formlabs.com/u/Schoner)\ **Post date:** [June 1, 2016, 9:21pm UTC](https://forum.formlabs.com/t/hulk-model/8396/7 "2016-06-01T21:21:22Z")
Hello David, great work! And he is really big. Is it all solid? I really don’t want to hijack your thread but today I started a print of a superhero too, on my new Form 2. It’s a garden gnome superhero I modelled many, many years ago. I had to realize that an enclosed hollow space was ignored by the printer resp. PreForm. So I made two openings across the feet. The figure is just 65 mm tall and layer thickness was 0,05. ![](https://us1.discourse-cdn.com/flex025/uploads/formlabs/original/2X/9/9dcacf5a34b99d48ab23be1739130e19c9733313.jpg) ![](https://us1.discourse-cdn.com/flex025/uploads/formlabs/original/2X/9/94dcab488a368d3967e9b7b7a396e932afc8449f.jpg) ![](https://us1.discourse-cdn.com/flex025/uploads/formlabs/original/2X/5/5b751e07b71c9792c9433362f7397aac9f153b3a.jpg) ![](https://us1.discourse-cdn.com/flex025/uploads/formlabs/original/2X/3/3cdd11f89b040da19fa0745f13815c0b1896a746.jpg) ---
**Author:** ![David\_Valle\_DGA](https://sea1.discourse-cdn.com/flex025/user_avatar/forum.formlabs.com/david_valle_dga/32/1742_2.png) [@David\_Valle\_DGA](https://forum.formlabs.com/u/David_Valle_DGA)\ **Post date:** [June 1, 2016, 11:02pm UTC](https://forum.formlabs.com/t/hulk-model/8396/8 "2016-06-01T23:02:12Z")
No Probem Schoner great work! I do like it. The Hulk is around 23cm tall. Hollowed the walls it to 1.1 mm I have made it in 4 sections. Less parts than that and you are looking into trouble. I did Primer the Hulk first and painted it with Humbrol modeling paint . I’m still working on it hopefully It will be finished soon. Cheers ---
**Author:** ![Gianni](https://avatars.discourse-cdn.com/v4/letter/g/a4c791/32.png) [@Gianni](https://forum.formlabs.com/u/Gianni)\ **Post date:** [June 2, 2016, 3:57am UTC](https://forum.formlabs.com/t/hulk-model/8396/9 "2016-06-02T03:57:52Z")
Hi, This is my experience: 28 cm. tall, 4 sez. 24 hours, 387 gr. with resin, ad the lowest resolution. Gianni ![](https://us1.discourse-cdn.com/flex025/uploads/formlabs/original/2X/6/623cdd5a8abc7ce6223ff365d8fd04542b09e2da.png) ---
**Author:** ![Gianni](https://avatars.discourse-cdn.com/v4/letter/g/a4c791/32.png) [@Gianni](https://forum.formlabs.com/u/Gianni)\ **Post date:** [June 2, 2016, 4:10am UTC](https://forum.formlabs.com/t/hulk-model/8396/10 "2016-06-02T04:10:04Z")
tall 28 cm., 9 sez. 32 hours , 314 gr. white resin low resolution. **After 40 hours has formed a crust in the tank** Gianni ![](https://us1.discourse-cdn.com/flex025/uploads/formlabs/original/2X/b/b7e6375bf80ece584486ef2af76504ca1d5cd0a6.png) ---
**Author:** ![Schoner](https://sea1.discourse-cdn.com/flex025/user_avatar/forum.formlabs.com/schoner/32/8152_2.png) [@Schoner](https://forum.formlabs.com/u/Schoner)\ **Post date:** [June 2, 2016, 6:12am UTC](https://forum.formlabs.com/t/hulk-model/8396/11 "2016-06-02T06:12:58Z")
Thanks, David, for the explanation. Have you sanded the model first of all or is the layer structure wiped out by the paint? ---
**Author:** ![gregor616](https://sea1.discourse-cdn.com/flex025/user_avatar/forum.formlabs.com/gregor616/32/6239_2.png) [@gregor616](https://forum.formlabs.com/u/gregor616)\ **Post date:** [June 2, 2016, 7:44pm UTC](https://forum.formlabs.com/t/hulk-model/8396/12 "2016-06-02T19:44:03Z")
I use Humbrol, some Citadel, and lately I have been mixing my own from Michaels, I use an airbrush and have gotten quite good at thinning, I find that if you get a good even primer base any paint will look good. ---
**Author:** ![David\_Valle\_DGA](https://sea1.discourse-cdn.com/flex025/user_avatar/forum.formlabs.com/david_valle_dga/32/1742_2.png) [@David\_Valle\_DGA](https://forum.formlabs.com/u/David_Valle_DGA)\ **Post date:** [June 2, 2016, 10:45pm UTC](https://forum.formlabs.com/t/hulk-model/8396/13 "2016-06-02T22:45:48Z")
Hi Yes I did sand it a little bit. Also the primer gets rid off/ Hiding the majority of print layers Great models Gianni! Cheers