# How would you setup this model to print?

**URL:** <https://forum.formlabs.com/t/how-would-you-setup-this-model-to-print/3800>\
**Category:** Support & Troubleshooting\
**Created:** [February 26, 2015, 8:45am UTC](https://forum.formlabs.com/t/how-would-you-setup-this-model-to-print/3800 "2015-02-26T08:45:47Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![MarcusKnorr](https://sea1.discourse-cdn.com/flex025/user_avatar/forum.formlabs.com/marcusknorr/32/75_2.png) [@MarcusKnorr](https://forum.formlabs.com/u/MarcusKnorr)\
**Post date:** [February 26, 2015, 8:45am UTC](https://forum.formlabs.com/t/how-would-you-setup-this-model-to-print/3800/1 "2015-02-26T08:45:47Z")

</div>

I was trying to print this Sphere model which has many smaller spheres within. Before I do some failprints do you have some advice for me?

I got it from here:  
[http://georgehart.com/rp/rp.html](http://georgehart.com/rp/rp.html)

![](http://forum.formlabs.com/uploads/formlabs/2729/30221c804fd8af58.jpg) ![](http://forum.formlabs.com/uploads/formlabs/2731/0353883ea533a6b3.jpg)

---

<div class="post-metadata">

**Author:** ![system](https://us1.discourse-cdn.com/flex025/uploads/formlabs/original/3X/5/b/5bc2bdf993ff27c2e0eecab5010b25626fbb327a.png) [@system](https://forum.formlabs.com/u/system)\
**Post date:** [March 12, 2015, 8:45am UTC](https://forum.formlabs.com/t/how-would-you-setup-this-model-to-print/3800/2 "2015-03-12T08:45:59Z")

</div>

Closed on March 12, 2015, 8:45am UTC

This topic was automatically closed 14 days after the last reply. New replies are no longer allowed.