# How to set the off set X and Y axis Values on LPU alignment LAP test on form3L

**URL:** <https://forum.formlabs.com/t/how-to-set-the-off-set-x-and-y-axis-values-on-lpu-alignment-lap-test-on-form3l/33611>\
**Category:** Form 3L\
**Created:** [March 29, 2022, 7:43am UTC](https://forum.formlabs.com/t/how-to-set-the-off-set-x-and-y-axis-values-on-lpu-alignment-lap-test-on-form3l/33611 "2022-03-29T07:43:30Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![Mim](https://avatars.discourse-cdn.com/v4/letter/m/a9a28c/32.png) [@Mim](https://forum.formlabs.com/u/Mim)\
**Post date:** [March 29, 2022, 7:43am UTC](https://forum.formlabs.com/t/how-to-set-the-off-set-x-and-y-axis-values-on-lpu-alignment-lap-test-on-form3l/33611/1 "2022-03-29T07:43:30Z")

</div>

Hello,

I have changed my Form3L LPU ( did the print test for laser alignment LAP)- now i have to set the values from the lap test results. Please if someone did the same, how you checked them?

thank you

---

<div class="post-metadata">

**Author:** ![Corey\_M](https://sea1.discourse-cdn.com/flex025/user_avatar/forum.formlabs.com/corey_m/32/18987_2.png) [@Corey\_M](https://forum.formlabs.com/u/Corey_M)\
**Post date:** [August 4, 2022, 7:52pm UTC](https://forum.formlabs.com/t/how-to-set-the-off-set-x-and-y-axis-values-on-lpu-alignment-lap-test-on-form3l/33611/2 "2022-08-04T19:52:03Z")

</div>

Hi @Mim,

Sorry for the late response but wanted to make sure you were able to get this done. If you haven’t already [reached out to our Support Team](https://support.formlabs.com/s/contact-support?language=en_US), I would advise you do so; they can get you the guide on how to run the calibration and answer any questions you might have about the process.

---

<div class="post-metadata">

**Author:** ![andrewcwood](https://avatars.discourse-cdn.com/v4/letter/a/3ec8ea/32.png) [@andrewcwood](https://forum.formlabs.com/u/andrewcwood)\
**Post date:** [October 7, 2022, 9:10pm UTC](https://forum.formlabs.com/t/how-to-set-the-off-set-x-and-y-axis-values-on-lpu-alignment-lap-test-on-form3l/33611/3 "2022-10-07T21:10:54Z")

</div>

Hello Corey,

Could you please send me a replacement LPU? I would like to get this machine up and running again.

Thank you!

**Non-Sensitive**

---

<div class="post-metadata">

**Author:** ![Jesse\_K](https://sea1.discourse-cdn.com/flex025/user_avatar/forum.formlabs.com/jesse_k/32/18872_2.png) [@Jesse\_K](https://forum.formlabs.com/u/Jesse_K)\
**Post date:** [October 11, 2022, 7:53pm UTC](https://forum.formlabs.com/t/how-to-set-the-off-set-x-and-y-axis-values-on-lpu-alignment-lap-test-on-form3l/33611/4 "2022-10-11T19:53:45Z")

</div>

Hi @andrewcwood,

Our Support team will be able to send you a replacement LPU if necessary. Please [reach out to them](https://support.formlabs.com/s/contact-support?language=en_US) in order to sort this out as efficiently as possible.
