# Help ! z axis problems

**URL:** https://forum.formlabs.com/t/help-z-axis-problems/25315
**Category:** Form 2
**Created:** [November 8, 2019, 1:05pm UTC](https://forum.formlabs.com/t/help-z-axis-problems/25315 "2019-11-08T13:05:20Z")
**Posts on this page:** 2
**Page:** 1

<div class="post-metadata">

### Author: ![franciscosanz](https://avatars.discourse-cdn.com/v4/letter/f/bcef8e/32.png) [@franciscosanz](https://forum.formlabs.com/u/franciscosanz)
#### Post date: [November 8, 2019, 1:05pm UTC](https://forum.formlabs.com/t/help-z-axis-problems/25315/1 "2019-11-08T13:05:20Z")

</div>

I’m trying to print at 0.5 microns but I can’t finish the whole process. Only part was printed, I tried to adjust the z-axis, from -50 to + 50, but I got the same result.

the same object at 1 microns prints good well at -60 (z axis) but at 0.5 microns I can’t print it ( only about 80 layers of 500 )

some help ? thanks !

---

<div class="post-metadata">

### Author: ![system](https://us1.discourse-cdn.com/flex025/uploads/formlabs/original/3X/5/b/5bc2bdf993ff27c2e0eecab5010b25626fbb327a.png) [@system](https://forum.formlabs.com/u/system)
#### Post date: [November 15, 2019, 1:05pm UTC](https://forum.formlabs.com/t/help-z-axis-problems/25315/2 "2019-11-15T13:05:40Z")

</div>

This topic was automatically closed 7 days after the last reply. New replies are no longer allowed.