# Help! Printing first time :)

**URL:** <https://forum.formlabs.com/t/help-printing-first-time/37446>\
**Category:** Support & Troubleshooting\
**Created:** [December 12, 2023, 9:31am UTC](https://forum.formlabs.com/t/help-printing-first-time/37446 "2023-12-12T09:31:22Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Benedikta](https://avatars.discourse-cdn.com/v4/letter/b/4bbf92/32.png) [@Benedikta](https://forum.formlabs.com/u/Benedikta)\
**Post date:** [December 12, 2023, 9:31am UTC](https://forum.formlabs.com/t/help-printing-first-time/37446/1 "2023-12-12T09:31:22Z")

</div>

I just uploaded my print on Form 3 printer successfully from Preform. On my printer is says “follow the steps to start printing”, all boxes are blue marked such as cartridge, build platform ready and tank unused, but when I press the “start print” box nothing happen! Any ideas what I’m doing wrong?

---

<div class="post-metadata">

**Author:** ![system](https://us1.discourse-cdn.com/flex025/uploads/formlabs/original/3X/5/b/5bc2bdf993ff27c2e0eecab5010b25626fbb327a.png) [@system](https://forum.formlabs.com/u/system)\
**Post date:** [June 11, 2024, 9:32pm UTC](https://forum.formlabs.com/t/help-printing-first-time/37446/2 "2024-06-11T21:32:01Z")

</div>

This topic was automatically closed 182 days after the last reply. New replies are no longer allowed.