# !HELP NEEDED ! Elongated parts

**URL:** <https://forum.formlabs.com/t/help-needed-elongated-parts/27004>\
**Category:** Support & Troubleshooting\
**Created:** [March 16, 2020, 9:33pm UTC](https://forum.formlabs.com/t/help-needed-elongated-parts/27004 "2020-03-16T21:33:51Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![BlacSun](https://avatars.discourse-cdn.com/v4/letter/b/ebca7d/32.png) [@BlacSun](https://forum.formlabs.com/u/BlacSun)\
**Post date:** [March 16, 2020, 9:33pm UTC](https://forum.formlabs.com/t/help-needed-elongated-parts/27004/1 "2020-03-16T21:33:51Z")

</div>

Help please. Im having a weird issue. I have a form 2 printer and all of my prints are coming out mirrored and elongated. The elongation is most prevalent when i’m printing circles. I’ve printed 3 pieces at different angles 30 , 90 and 180 degrees. The affect is most prevalent at 180"parallel to build surface".I’ve updated the printer and rebooted . ive cleaned the tank and made sure the build surface is clean. if there is any thing i can try please let me know. 👍  
[https://photos.google.com/album/AF1QipMoBQAQ6aSU0Y\_\_t1hI0cRCM14GeoCpFSvQDH9q](https://photos.google.com/album/AF1QipMoBQAQ6aSU0Y__t1hI0cRCM14GeoCpFSvQDH9q)

---

<div class="post-metadata">

**Author:** ![mh1974](https://avatars.discourse-cdn.com/v4/letter/m/87869e/32.png) [@mh1974](https://forum.formlabs.com/u/mh1974)\
**Post date:** [March 17, 2020, 9:27pm UTC](https://forum.formlabs.com/t/help-needed-elongated-parts/27004/2 "2020-03-17T21:27:27Z")

</div>

That link results in:

"404. That’s an error.

The requested URL was not found on this server. That’s all we know."

---

<div class="post-metadata">

**Author:** ![BlacSun](https://avatars.discourse-cdn.com/v4/letter/b/ebca7d/32.png) [@BlacSun](https://forum.formlabs.com/u/BlacSun)\
**Post date:** [March 17, 2020, 9:34pm UTC](https://forum.formlabs.com/t/help-needed-elongated-parts/27004/3 "2020-03-17T21:34:57Z")

</div>

Your url is not found …

---

<div class="post-metadata">

**Author:** ![system](https://us1.discourse-cdn.com/flex025/uploads/formlabs/original/3X/5/b/5bc2bdf993ff27c2e0eecab5010b25626fbb327a.png) [@system](https://forum.formlabs.com/u/system)\
**Post date:** [March 31, 2020, 9:35pm UTC](https://forum.formlabs.com/t/help-needed-elongated-parts/27004/4 "2020-03-31T21:35:06Z")

</div>

This topic was automatically closed 14 days after the last reply. New replies are no longer allowed.