# Help for Bluecast

**URL:** <https://forum.formlabs.com/t/help-for-bluecast/16028>\
**Category:** Support & Troubleshooting\
**Created:** [November 26, 2017, 5:54am UTC](https://forum.formlabs.com/t/help-for-bluecast/16028 "2017-11-26T05:54:59Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![Louis9999](https://avatars.discourse-cdn.com/v4/letter/l/b9bd4f/32.png) [@Louis9999](https://forum.formlabs.com/u/Louis9999)\
**Post date:** [November 26, 2017, 5:54am UTC](https://forum.formlabs.com/t/help-for-bluecast/16028/1 "2017-11-26T05:54:59Z")

</div>

hello, i am using resin bluecast for preform machine during casting encountering some malfunction.  
After cleaning with alcohol the product is deformed in the direction of contraction and after mixing the gypsum 4-5h I start the burning process.  
My burning process is as follows  
open the furnace 150 degrees C insert flask within 1h  
Then I increased to 800 degrees Celsius within 4 hours and cooled down to 650 degrees Celsius for 1h.  
After the product found too many errors for help  
Sorry i use google translate

---

<div class="post-metadata">

**Author:** ![Louis9999](https://avatars.discourse-cdn.com/v4/letter/l/b9bd4f/32.png) [@Louis9999](https://forum.formlabs.com/u/Louis9999)\
**Post date:** [November 26, 2017, 7:32am UTC](https://forum.formlabs.com/t/help-for-bluecast/16028/2 "2017-11-26T07:32:41Z")

</div>

![2017-11-25_23-26-42](https://us1.discourse-cdn.com/flex025/uploads/formlabs/original/2X/1/13a13702216b24fa11904b124747014009d8dce2.png) ![2017-11-25_23-26-12](https://us1.discourse-cdn.com/flex025/uploads/formlabs/original/2X/7/77e19e6f538079bf2343687fd99d838cbeb691f7.png)

 ![2017-11-25_23-32-03](https://us1.discourse-cdn.com/flex025/uploads/formlabs/original/2X/d/d076cd0508e6a50580548835d52e76356149d91d.png)

---

<div class="post-metadata">

**Author:** ![system](https://us1.discourse-cdn.com/flex025/uploads/formlabs/original/3X/5/b/5bc2bdf993ff27c2e0eecab5010b25626fbb327a.png) [@system](https://forum.formlabs.com/u/system)\
**Post date:** [December 10, 2017, 7:32am UTC](https://forum.formlabs.com/t/help-for-bluecast/16028/3 "2017-12-10T07:32:41Z")

</div>

This topic was automatically closed 14 days after the last reply. New replies are no longer allowed.