# Heating taking too long?

**URL:** <https://forum.formlabs.com/t/heating-taking-too-long/13884>\
**Category:** Support & Troubleshooting\
**Created:** [June 25, 2017, 7:00pm UTC](https://forum.formlabs.com/t/heating-taking-too-long/13884 "2017-06-25T19:00:36Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![Imagedental](https://avatars.discourse-cdn.com/v4/letter/i/a587f6/32.png) [@Imagedental](https://forum.formlabs.com/u/Imagedental)\
**Post date:** [June 25, 2017, 7:00pm UTC](https://forum.formlabs.com/t/heating-taking-too-long/13884/1 "2017-06-25T19:00:36Z")

</div>

Hi I just got a second printer, and this one takes for ever to heat the resin and will give the error that it hasn’t reach temp. is this normal? or is it an issue?

---

<div class="post-metadata">

**Author:** ![Frew](https://avatars.discourse-cdn.com/v4/letter/f/c0e974/32.png) [@Frew](https://forum.formlabs.com/u/Frew)\
**Post date:** [June 26, 2017, 4:13pm UTC](https://forum.formlabs.com/t/heating-taking-too-long/13884/2 "2017-06-26T16:13:24Z")

</div>

Ambient environmental temperature will have an impact on heating time, but if your printers are in the same spot and having significant differences in heating times, you’ll want to [open a ticket with our support team](https://support.formlabs.com/hc/en-us/requests/new) so that we can look into this for you.

---

<div class="post-metadata">

**Author:** ![system](https://us1.discourse-cdn.com/flex025/uploads/formlabs/original/3X/5/b/5bc2bdf993ff27c2e0eecab5010b25626fbb327a.png) [@system](https://forum.formlabs.com/u/system)\
**Post date:** [July 10, 2017, 4:13pm UTC](https://forum.formlabs.com/t/heating-taking-too-long/13884/3 "2017-07-10T16:13:33Z")

</div>

Closed on July 10, 2017, 4:13pm UTC

This topic was automatically closed 14 days after the last reply. New replies are no longer allowed.
