# Grey V4, max unsupported overhang

**URL:** <https://forum.formlabs.com/t/grey-v4-max-unsupported-overhang/20230>\
**Category:** Form 2\
**Created:** [August 27, 2018, 10:55pm UTC](https://forum.formlabs.com/t/grey-v4-max-unsupported-overhang/20230 "2018-08-27T22:55:00Z")\
**Posts on this page:** 1\
**Showing post:** 4

<div class="post-metadata">

**Author:** ![eaelec](https://avatars.discourse-cdn.com/v4/letter/e/13edae/32.png) [@eaelec](https://forum.formlabs.com/u/eaelec)\
**Post date:** [August 29, 2018, 2:18am UTC](https://forum.formlabs.com/t/grey-v4-max-unsupported-overhang/20230/4 "2018-08-29T02:18:53Z")

</div>

The same fire hydrants printed using Grey V3, all of the spigots are fine.

 ![hyrants_GV3](https://us1.discourse-cdn.com/flex025/uploads/formlabs/original/2X/c/ca0e93f3fc16d3cd482c0958e64b73f95ec56502.JPG)

---

_[View the full topic](https://forum.formlabs.com/t/grey-v4-max-unsupported-overhang/20230)._