# Great story of installing new tank

**URL:** <https://forum.formlabs.com/t/great-story-of-installing-new-tank/18378>\
**Category:** Form 2\
**Created:** [April 18, 2018, 8:09am UTC](https://forum.formlabs.com/t/great-story-of-installing-new-tank/18378 "2018-04-18T08:09:22Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![mcc](https://avatars.discourse-cdn.com/v4/letter/m/3e96dc/32.png) [@mcc](https://forum.formlabs.com/u/mcc)\
**Post date:** [April 18, 2018, 8:09am UTC](https://forum.formlabs.com/t/great-story-of-installing-new-tank/18378/1 "2018-04-18T08:09:22Z")

</div>

At last. New LT resin tank arrived.  
We poured old resin into new one - and installed it into printer.  
**First problem** - printer said that the resin tank was used with another resin and it should be clean to “reset it” into hight temp resin tank. First few attempts failed. We’ve cleaned the resin. Nothing happened.  
Contacting to the support was OK. They told us that the drivers of the printer is old and it’s need to be updated.  
**Second problem** - automatic update was imposible due to “decyption failed” error. Seems that old driver was to old to get automatic update.  
After some time we’ve found link to download manually update. Finally! ( [https://s3.amazonaws.com/bessemer-releases/release/form2-rc-1.16.8-19.formware](https://s3.amazonaws.com/bessemer-releases/release/form2-rc-1.16.8-19.formware) )  
**Third problem** - touchscreen. After manually updating printer seems to have problems with touch screen (doesnt work). Searching the forum - turn off/on several times to make it work. Yes. Finally.  
It all lasted 1,5h. Is it fine now ? Idk. It is printing. I hope that some things will change.

---

<div class="post-metadata">

**Author:** ![Garry\_McGillan](https://avatars.discourse-cdn.com/v4/letter/g/e480ec/32.png) [@Garry\_McGillan](https://forum.formlabs.com/u/Garry_McGillan)\
**Post date:** [April 19, 2018, 2:10pm UTC](https://forum.formlabs.com/t/great-story-of-installing-new-tank/18378/2 "2018-04-19T14:10:55Z")

</div>

Thanks for this, just saved me a bit of time, in the exact same scenario.

---

<div class="post-metadata">

**Author:** ![system](https://us1.discourse-cdn.com/flex025/uploads/formlabs/original/3X/5/b/5bc2bdf993ff27c2e0eecab5010b25626fbb327a.png) [@system](https://forum.formlabs.com/u/system)\
**Post date:** [May 3, 2018, 2:10pm UTC](https://forum.formlabs.com/t/great-story-of-installing-new-tank/18378/3 "2018-05-03T14:10:58Z")

</div>

Closed on May 3, 2018, 2:10pm UTC

This topic was automatically closed 14 days after the last reply. New replies are no longer allowed.
