# Gooey prints, grey v3

**URL:** <https://forum.formlabs.com/t/gooey-prints-grey-v3/16572>\
**Category:** Form 2\
**Created:** [December 31, 2017, 8:14pm UTC](https://forum.formlabs.com/t/gooey-prints-grey-v3/16572 "2017-12-31T20:14:21Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![AnthonyAragues](https://sea1.discourse-cdn.com/flex025/user_avatar/forum.formlabs.com/anthonyaragues/32/11355_2.png) [@AnthonyAragues](https://forum.formlabs.com/u/AnthonyAragues)\
**Post date:** [December 31, 2017, 8:14pm UTC](https://forum.formlabs.com/t/gooey-prints-grey-v3/16572/1 "2017-12-31T20:14:21Z")

</div>

I have a form 2 with grey v3. I haven’t printed much. I printed a part recently that feels a little soft and flexible. I thought this might be normal for the material until I compared it to the sample chess piece I got before owning the printer. It’s considerably more solid. I know that some materials need to be cured after words but I didnt thinkt hat applied to this material. Not sure what my troubleshooting options are on this. thanks.

---

<div class="post-metadata">

**Author:** ![Steven\_Hines](https://sea1.discourse-cdn.com/flex025/user_avatar/forum.formlabs.com/steven_hines/32/7985_2.png) [@Steven\_Hines](https://forum.formlabs.com/u/Steven_Hines)\
**Post date:** [December 31, 2017, 8:21pm UTC](https://forum.formlabs.com/t/gooey-prints-grey-v3/16572/2 "2017-12-31T20:21:38Z")

</div>

Sounds like you might not have printed in a while. Did you shake your cartridge very very well before printing, assuming it’s been sitting around while? Separation can make a big difference. Just an idea.

---

<div class="post-metadata">

**Author:** ![AnthonyAragues](https://sea1.discourse-cdn.com/flex025/user_avatar/forum.formlabs.com/anthonyaragues/32/11355_2.png) [@AnthonyAragues](https://forum.formlabs.com/u/AnthonyAragues)\
**Post date:** [December 31, 2017, 8:55pm UTC](https://forum.formlabs.com/t/gooey-prints-grey-v3/16572/3 "2017-12-31T20:55:53Z")

</div>

I have not shaken the cartridge. I didn’t know that was a thing. I guess it makes sense. I’ll give it a try. Thanks.

---

<div class="post-metadata">

**Author:** ![Frew](https://avatars.discourse-cdn.com/v4/letter/f/c0e974/32.png) [@Frew](https://forum.formlabs.com/u/Frew)\
**Post date:** [January 3, 2018, 4:03pm UTC](https://forum.formlabs.com/t/gooey-prints-grey-v3/16572/4 "2018-01-03T16:03:52Z")

</div>

There can be a few things that would increase the flexibility of a part. Thin walls are one of the more obvious causes, but over-soaking a part in IPA will have an effect as well. Standard Resins often don’t need to be cured because they’re not used in a mechanical context, but curing parts will increase the stiffness.

---

<div class="post-metadata">

**Author:** ![system](https://us1.discourse-cdn.com/flex025/uploads/formlabs/original/3X/5/b/5bc2bdf993ff27c2e0eecab5010b25626fbb327a.png) [@system](https://forum.formlabs.com/u/system)\
**Post date:** [January 17, 2018, 4:03pm UTC](https://forum.formlabs.com/t/gooey-prints-grey-v3/16572/5 "2018-01-17T16:03:56Z")

</div>

Closed on January 17, 2018, 4:03pm UTC

This topic was automatically closed 14 days after the last reply. New replies are no longer allowed.
