# Gasoline

**URL:** <https://forum.formlabs.com/t/gasoline/31786>\
**Category:** General Discussion\
**Created:** [August 22, 2021, 9:02am UTC](https://forum.formlabs.com/t/gasoline/31786 "2021-08-22T09:02:32Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![masterjul](https://avatars.discourse-cdn.com/v4/letter/m/76d3ee/32.png) [@masterjul](https://forum.formlabs.com/u/masterjul)\
**Post date:** [August 22, 2021, 9:02am UTC](https://forum.formlabs.com/t/gasoline/31786/1 "2021-08-22T09:02:33Z")

</div>

Hello  
Is it possible to use a formlabs resin resisting to car gasoline ?  
I’d like to print a piece in contact with gasoline on a motorcycle.  
Thx  
Jul

---

<div class="post-metadata">

**Author:** ![system](https://us1.discourse-cdn.com/flex025/uploads/formlabs/original/3X/5/b/5bc2bdf993ff27c2e0eecab5010b25626fbb327a.png) [@system](https://forum.formlabs.com/u/system)\
**Post date:** [February 20, 2022, 9:02pm UTC](https://forum.formlabs.com/t/gasoline/31786/2 "2022-02-20T21:02:33Z")

</div>

This topic was automatically closed 182 days after the last reply. New replies are no longer allowed.