# Fuse 1+ self prime after print **URL:** https://forum.formlabs.com/t/fuse-1-self-prime-after-print/45659 **Category:** Fuse 1/1+ **Created:** [October 31, 2025, 6:19pm UTC](https://forum.formlabs.com/t/fuse-1-self-prime-after-print/45659 "2025-10-31T18:19:23Z") **Posts on this page:** 1 **Showing post:** 3
### Author: ![jmasterson](https://avatars.discourse-cdn.com/v4/letter/j/53a042/32.png) [@jmasterson](https://forum.formlabs.com/u/jmasterson) #### Post date: [October 31, 2025, 6:33pm UTC](https://forum.formlabs.com/t/fuse-1-self-prime-after-print/45659/3 "2025-10-31T18:33:46Z")
Woah, that’s not good. This has never happened to me. Are the bed temp printed plaques in there? AFAIK the printer doesn’t allow you to prime after a completed job until the chamber is removed and replaced. I don’t think the printer can be primed remotely either. This seems like a really bad firmware bug. My totally uneducated guess would be that it’s related to the bed temp job, and potentially OMM (is this printer OMM?) Or maybe it’s related to this bug that was supposed to be patched in the 1.23 firmware update: [**Bug fixes:**](https://support.formlabs.com/s/article/Firmware-Release-Notes?language=en_US#fuse1-plus) - **Overlapping prints:** Resolved a bug where two jobs uploaded in quick succession to a primed printer could result in the second job printing on top of the first. --- _[View the full topic](https://forum.formlabs.com/t/fuse-1-self-prime-after-print/45659)._