# Fuse 1 PA powder

**URL:** https://forum.formlabs.com/t/fuse-1-pa-powder/21559
**Category:** Fuse 1/1+
**Created:** [December 16, 2018, 2:02pm UTC](https://forum.formlabs.com/t/fuse-1-pa-powder/21559 "2018-12-16T14:02:27Z")
**Posts on this page:** 2
**Page:** 1

<div class="post-metadata">

### Author: ![hayesfreeman](https://avatars.discourse-cdn.com/v4/letter/h/a587f6/32.png) [@hayesfreeman](https://forum.formlabs.com/u/hayesfreeman)
#### Post date: [December 16, 2018, 2:02pm UTC](https://forum.formlabs.com/t/fuse-1-pa-powder/21559/1 "2018-12-16T14:02:27Z")

</div>

Does anyone know how much the nylon powder for the Fuse 1 will cost? How much will it cost to make parts with this printer?

---

<div class="post-metadata">

### Author: ![JeffLewis](https://avatars.discourse-cdn.com/v4/letter/j/50afbb/32.png) [@JeffLewis](https://forum.formlabs.com/u/JeffLewis)
#### Post date: [March 6, 2022, 8:22pm UTC](https://forum.formlabs.com/t/fuse-1-pa-powder/21559/2 "2022-03-06T20:22:17Z")

</div>

10 cents per gram of the part